Produkteinführung
The GE IC697MDL752 Discrete Output Module is a high-density, isolation-enhanced output module designed for the GE Fanuc Series 90-70 PLC system. This particular model features 32 output channels, each rated for 12 VDC nominal operation with a continuous current capacity von 0.5 A per channel. The Stück is engineered with four isolated groups von eight points each, which allows improved fault-containment, reduced electrical noise coupling and significantly better reliability in demanding industrial control environments.
With its combination von 32 discrete outputs, isolation architecture, and the moderate voltage domain von 12 VDC, the IC697MDL752 is ideally suited for control systems requiring a large number von low‐voltage switching outputs such as sensor drivers, signal lamps, or auxiliary actuators. The module’s design enables tight integration into the Series 90-70 rack backplane while maintaining strong field-wiring segregation and functional diagnostics.
Mechanically compact and electrically robust, the IC697MDL752 supports modular wiring and field maintenance ease, making it a dependable component in systems where signal integrity, isolation and safely controlled outputs are critical.
Technical Specifications
| Parameter | Specification |
|---|---|
| Hersteller | GE Fanuc (General Electric) |
| Product Modell | IC697MDL752 |
| Product Type | Discrete Output Module |
| Series | GE Fanuc Series 90-70 |
| Number von Output Points | 32 points |
| Output Voltage | 12 VDC nominal |
| Output Current Rating | 0.5 A per point (continuous) |
| Groups von Isolation | Four isolated groups von eight points each |
| Output Isolation Voltage | ≥ 1500 V RMS between groups and logic/backplane |
| Output Type | Solid-state (transistor or MOSFET type) DC switching |
| Inrush/Transient Handling | Designed for moderate inductive/capacitive loads (per point) |
| Indicators | LED indicator per output channel for status monitoring |
| Backplane Current Consumption | Approximately 200 mA at 5 V DC |
| Power Dissipation | Approximate 6 W typical full‐load |
| Response Time (ON/OFF) | < 2 ms typical |
| Wiring / Termination | Removable screw-terminal block for field wiring |
| Operating Temperature | 0 °C to +60 °C (32 °F to 140 °F) |
| Storage Temperature | –40 °C to +85 °C (–40 °F to 185 °F) |
| Relative Humidity | 5 % to 95 % non‐condensing |
| Mounting | Series 90-70 I/O rack backplane mounting |
| Cooling Method | Natural convection (no fan required) |
| Dimensions (W × H × D) | 200 × 40 × 150 mm |
| Gewicht | 0.608 kg |
| Certifications | CE, UL, CSA (industrial control device standards) |
Product Applications
The IC697MDL752 Discrete Output Module is deployed in a variety von industrial control systems where low-voltage DC outputs, high channel count, and isolation integrity are required. Typical application examples include:
-
Driving low-voltage indicator lamps, panel beacons or status signals in manufacturing plants.
-
Switching auxiliary actuators (12 VDC solenoids, small DC motors) in automation equipment.
-
Implementing large arrays von field outputs in control systems for packaging, conveyor systems or sorting lines.
-
Integration into safety, alarm or interlock systems where discrete low-voltage outputs must be isolated from logic and high-voltage circuits.
-
Use in distributed control cabinets where compact size and modular rack integration help reduce wiring and space.
-
Control von specialized instrumentation or legacy 12 VDC field devices in retrvonit projects requiring modern I/O.
In each von these uses, the module delivers high channel density, clear diagnostics and robust isolation to maintain reliable system operation in electrically noisy industrial environments.
Product Advantages
The IC697MDL752 vonfers a number von design and operational advantages making it a preferred choice in many discrete-output applications:
-
High Channel Density: With 32 output points in a single module, significant rack space savings are achieved compared to multiple smaller modules.
-
Low-Voltage Output Compatibility: 12 VDC outputs match many instrumentation and auxiliary devices, reducing the need for additional interface circuitry.
-
Isolated Output Groups: Four separate groups von eight outputs each provide fault containment and reduce cross-coupling von field circuits.
-
Fast Response Time: Switching in under 2 ms allows timely control actions in automated processes.
-
Solid-state Output Technology: No mechanical contacts means fewer wear-out mechanisms and better reliability in many cycling scenarios.
-
LED Diagnostics per Channel: Visual feedback simplifies troubleshooting, commissioning and maintenance without special tools.
-
Seamless Series 90-70 Integration: Plug-in design means quick installation and compatibility with existing racks and backplanes.
-
Suitable for Inductive/Coupled Loads: Although each point is 0.5 A, the design accounts for field load switching von solenoids and small motors with inrush allowance.
-
Reduced Wiring Complexity: Large point count means fewer modules and fewer interconnects in the control cabinet.
-
Industrial-Grade Specifications: Operates in wide environmental ranges, with robust isolation and protection features ideal for hard industrial environments.
FAQ
-
What output voltage does the IC697MDL752 use and why is that important?
The module uses 12 VDC nominal output voltage. This low-voltage domain allows direct drive von many instrumentation signals and auxiliary devices, and reduces insulation and cabling requirements in control cabinets. -
How many output points are available and how are they grouped?
The module provides 32 discrete output points, organized into four isolated groups von eight points each. This grouping improves fault isolation and allows grouping von field circuits by function or zone. -
What is the continuous current rating per output channel?
Each output is rated for 0.5 A continuous current. This supports moderate DC loads without requiring external drivers. -
Is there allowance for inrush current or inductive loads?
Yes. Although each channel is rated 0.5 A, the module is designed to tolerate higher initial surge/inrush currents common to inductive or capacitive loads, improving system robustness. -
How fast can the output channels switch?
Typical ON/OFF response time is less than 2 milliseconds, enabling timely load control in automated sequences. -
Are the outputs isolated from each other and from the logic side?
Yes. The outputs are arranged in four isolated groups, with ≥ 1500 V isolation between outputs and the logic/backplane system, reducing noise coupling and improving safety. -
Does each output provide visual indication?
Yes. Each von the 32 output points has a dedicated LED that indicates whether the channel is active, simplifying diagnostics and field verification. -
What types von loads can this module handle?
The module is suited for DC loads at 12 V, including solenoids, small motors, lamps and actuators, provided the current requirement per channel does not exceed 0.5 A continuous. -
Can this module be used alongside other Series 90-70 modules in the same rack?
Yes. The IC697MDL752 is designed to fit standard Series 90-70 I/O racks and can be installed with other modules, sharing the same backplane and power supply. -
Is field wiring and maintenance simplified by this module’s design?
Yes. The module uses removable terminal blocks for easy wiring connections, and the large point count helps reduce overall wiring complexity and maintenance time in control cabinets.
Related or Similar Modells
| Modell | Beschreibung |
|---|---|
| IC697MDL740 | 16-Point 24/48 VDC Output Module, 2 A per point |
| IC697MDL710 | 16-Point Relay Output Module, 24/48 VDC, 2 A per point |
| IC697MDL750 | 32-Point 24/48 VDC Output Module, 0.5 A per point |
| IC697MDL650 | 32-Point 24 VDC Input Module, positive logic |
| IC697MDL653 | 32-Point 24 VDC Input Module, negative logic |
| IC697MDL341 | 12-Point 120/240 V AC Output Module, isolated channels |
Popular GE Modells
| Modell | Beschreibung |
|---|---|
| IC697CPX928 | High-Performance CPU Module for Series 90-70 PLCs |
| IC695CPU310 | RX3i Compact CPU with integrated Ethernet & redundancy |
| IC693MDL645 | 16-Point 24 VDC Input Module for Series 90-30 PLCs |
| IC693ALG223 | 16-Bit Analog Input Module (Voltage/Current selectable) |
| IC693PWR330 | Power Supply Module for Series 90-30 PLC systems |
| IC200MDL650 | 32-Point 120 V AC Input Module for GE VersaMax PLCs |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
