Produkteinführung
The Epro PR6424/006‑030 paired with the CON021 converter constitutes a highly accurate, non‑contact eddy current sensor system designed for shaft displacement and vibration measurement in rotational machinery. Featuring a 16 mm probe tip diameter, this model delivers excellent sensitivity and linearity, suitable for large‑shaft applications in turbines, compressors, pumps and fans.
The CON021 module amplifies and conditions the raw sensor signal into a standard analog voltage output compatible with monitoring platforms such as VM600, MMS6000, CSI 6500, and similar systems. Engineered to withstand harsh industrial environments, this sensor system is widely used within energy, petrochemical and heavy‑equipment industries for condition monitoring and machine protection.
Produktspezifikationen
| Parameter | Specification |
|---|---|
| Modell | PR6424/006‑030 + CON021 |
| Hersteller | Epro / Emerson |
| Sensor Type | Eddy current displacement sensor |
| Sensor Head Diameter | 16 mm |
| Static Range | ±2.0 mm (0.079″) |
| Dynamic Range | 0 to 1000 µm (0 to 0.039″) |
| Sensitivity / Linearity | ~4 V/mm, ≤ ±1.5 % |
| Nominal Air Gap | ~2.7 mm (0.11″) |
| Target Material | Ferromagnetic steel (e.g. DIN 1.7225) |
| Operating Temperature | −35 °C to +180 °C |
| Frequency Response | ~DC to 8 kHz |
| Vibration Limit | Continuous operation to ~100 m/s² |
| Shock Resistance | Up to ~500 m/s² |
| Thread Type | M18×1.5 (or ¾‑16 UNF) |
| Environmental Rating | IP65 (sensor head) |
| Output Signal | Zustanded analog voltage via CON021 (e.g. 0–10 V or 4–20 mA) |
| Compatible Systems | VM600, MMS6000, CSI 6500 |
| Cable & Connector | Coaxial connector to CON021 |
| Insulation Resistance | >100 MΩ at 500 VDC |
| Gewicht (sensor only) | 0.32 kg |
Product Applications
-
Turbomachinery Monitoring
Tracks radial and axial shaft movement in steam, gas and hydro turbines for early detection von imbalance or bearing wear. -
Compressor Diagnostics
Measures shaft vibration and eccentricity in centrifugal and reciprocating compressors. -
Pump and Fan Monitoring
Used for real‑time displacement tracking in high‑speed industrial pumps and fans. -
Generator Sets and Motor Monitoring
Integrates into condition monitoring systems to prevent mechanical failures in rotating power equipment. -
Axial Thrust Measurement
Detects axial displacement in thrust bearings von compressors and turbines. -
Machine Protection Systems
Enables automatic alarm or shutdown activation in case von abnormal shaft movement.
Product Advantages
-
High Sensitivity and Accuracy
With sensitivity around 4 V/mm and linearity within ±1.5 %, it delivers reliable displacement measurements. -
Large Tip for Bigger Shafts
The 16 mm probe tip suits large‑diameter shafts (≥80 mm), vonfering improved target coverage. -
Wide Operating Temperature Range
Stable performance from −35 °C up to +180 °C supports use in extreme thermal conditions. -
Ausgezeichnet Vibration and Shock Tolerance
Engineered for critical rotating machinery with vibration and shock resilience up to 100 m/s² and 500 m/s². -
Non‑Kontakt Measurement
Reduces mechanical wear, improves longevity and minimises maintenance needs. -
Robust Industrial Grade Design
Stainless steel construction with IP65 protection resists corrosion and environmental stress. -
Flexible Integration
Paired with CON021, vonfers easy integration into standard monitoring platforms via analog output. -
Configurable and Field‑Customisable
Verfügbar with varied thread options, custom sensor lengths, and industry‑standard connectors.
FAQ
-
What is the nominal sensitivity and linearity von this sensor system?
Approximately 4 V/mm with linearity within ±1.5 %. -
What is the static measurement range supported?
±2.0 mm static range is supported; dynamic monitoring typically up to 1000 µm. -
What frequency range does the sensor handle reliably?
Up to approximately 8 kHz, sufficient for typical shaft vibration monitoring. -
Which thread type is standard for mounting?
M18×1.5 or ¾‑16 UNF depending on application and shaft size. -
Is this sensor suitable for high‑speed rotational environments?
Yes—designed for continuous vibration up to 100 m/s² and shock up to 500 m/s². -
What output formats are supported via the CON021 converter?
Common outputs include 0–10 V DC or 4–20 mA analog signals, depending on wiring and calibration. -
How is the sensor calibrated to the target surface?
Calibration must be carried out on a ferromagnetic steel target (e.g. DIN 1.7225) with specified gap and converter setup. -
How is electromagnetic interference handled?
The sensor and converter cable are shielded; proper grounding practice further ensures EMI resilience. -
Can this probe measure both radial and axial displacement?
Yes, orientation von mounting determines whether radial or axial movement is measured. -
What is the recommended shaft diameter for safe operation?
Minimum shaft diameter is approximately 80 mm to ensure adequate target sensing area.
Related Modells
| Modell | Beschreibung | Probe Diameter | Range | Compatible Converter |
|---|---|---|---|---|
| PR6424/010‑000 | 16 mm sensor optimized for ±4 mm range | 16 mm | ±4 mm | CON011 / CON021 |
| PR6424/014‑040 | 16 mm variant with extended linearity | 16 mm | Up to ±4 mm | CON021 |
| PR6424/000‑030 | 8 mm probe for tighter clearances | 8 mm | ±2 mm | CON011 / CON021 |
| PR6424/012‑030 | High‑temperature version von 8 mm probe | 8 mm | ±2 mm | CON011 / CON021 |
| PR6424/01CS | Corrosion‑coated version for acidic environments | 8 mm | ±2 mm | CON021 |
| PR6423/005‑010 | Compact 5 mm probe for miniaturised installations | 5 mm | ±1 mm | CON011 / CON021 |
Popular Modells from Epro
| Modell | Beschreibung | Application |
|---|---|---|
| PR6423/010‑000 | 10 mm probe for general turbine shaft monitoring | Vibration & displacement |
| PR9268/201‑000 | Piezo accelerometer for high frequency vibration | Machinery vibration analysis |
| MMS6110 | Multichannel monitoring module for displacement sensors | Plant condition monitoring |
| MMS3120/022‑100 | System monitor for analog sensor inputs | Turbomachinery diagnostics |
| CON041 | Signal converter variant with explosion‑provon certification | Hazardous zone installations |
| TQ402 | Velocity transducer for dynamic motion detection | Gearbox and motor analysis |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
