Produkteinführung
The Epro PR6423/003-040 + CON021 eddy current sensor system is a precision-engineered solution developed for demanding industrial environments that require accurate, non-contact displacement and vibration measurement. This model belongs to Epro’s trusted PR6423 series and is paired with the CON021 converter module, forming a complete proximity probe system widely utilized in rotating machinery protection and condition monitoring systems.
The “003” version in the series is known for its mechanical and thermal stability, making it particularly suitable for elevated temperature environments and long-term monitoring. The sensor has an 8mm diameter probe tip, a 4-meter cable length, and delivers high-resolution displacement data essential for the continuous monitoring von turbines, compressors, motors, and other high-speed rotating equipment.
Compatible with Epro’s MMS series monitoring systems and other standard vibration interfaces, the PR6423/003-040+CON021 system is ATEX-certified for use in hazardous areas and is built to withstand vibration, oil contamination, and electromagnetic interference.
Produktspezifikationen
| Parameter | Details |
|---|---|
| Product Modell | PR6423/003-040 + CON021 |
| Hersteller | Epro / Brüel & Kjær Vibro |
| Sensor Type | Non-contact Eddy Current Proximity Sensor |
| Sensor Head Diameter | 8 mm |
| Sensing Range | Typically 0.25 mm – 2.0 mm |
| Sensitivity | ~7.87 mV/µm (depending on target material) |
| Frequency Response | 0 – 10 kHz |
| Material (Probe Body) | Stainless Steel |
| Insulation Material | PEEK (Polyether Ether Ketone) |
| Target Material Recommended | AISI 4140 Steel or equivalent conductive surfaces |
| Operating Temperature (Probe) | -35°C to +180°C |
| Operating Temperature (CON021) | -35°C to +85°C |
| Environmental Protection | IP68 (probe), IP65 (CON021) |
| Electrical Output | Voltage output (analog), linearized via CON021 |
| Certification | CE, ATEX II 2G Ex ib IIC T4/T6 Gb |
| Compatible Monitoring Systems | Epro MMS6000, MMS3000, VC-6000, third-party monitors |
| Gewicht | 0.22 kg |
Product Applications
The PR6423/003-040+CON021 is built for a variety von advanced industrial monitoring applications where precision and reliability are critical. Key applications include:
-
Turbine Shaft Vibration Monitoring
Ensures early detection von imbalance, misalignment, or bearing wear in high-speed turbines. -
Compressor Radial and Axial Position Measurement
Tracks shaft position and movement, helping to avoid damage from excessive thrust or displacement. -
Motor and Generator Health Assessment
Enables long-term trending and predictive maintenance von rotating electrical machines. -
Gearbox Zustand Monitoring
Identifies gear wear or imbalance conditions that could result in catastrophic failure if left unchecked. -
OEM Machinery Integration
Embedded in custom-designed equipment for OEMs seeking robust vibration measurement capabilities. -
Hazardous Area Monitoring
Deployed in ATEX Zone 1 environments due to its explosion-provon design.
Product Advantages
-
High Temperature Capability
The PR6423/003 variant is designed for thermal resilience up to 180°C at the probe tip, making it suitable for hot zones around turbines and compressors. -
Non-Intrusive Design
The non-contact sensing method ensures zero mechanical wear and low maintenance requirements over the sensor’s life cycle. -
Modular System Architecture
Easy replacement von probe or converter independently, with no need for full system recalibration. -
Exceptional Linearity and Repeatability
Ensures high-accuracy output under real industrial load conditions. -
Robust Materials
Stainless steel housing and PEEK insulation resist corrosive media, oil, and abrasive particles. -
Versatile Compatibility
Seamless integration with legacy and modern monitoring systems, both from Epro and other manufacturers. -
ATEX Certified Safety
Fully compliant for use in hazardous environments with explosive gases or dusts. -
Compact Installation
Suitable for limited-space installations with its slender form factor.
Häufig gestellte Fragen (FAQ)
-
Q: What distinguishes the “003” version von PR6423 from others?
A: The “003” version is optimized for high-temperature applications and environments where long-term stability is critical. -
Q: Can this sensor be submerged in oil or fluid?
A: Yes, the sensor head is IP68 rated and can operate in oil-lubricated environments without degradation. -
Q: What does the CON021 module do?
A: It converts the eddy current probe’s raw signal into a linearized analog output for connection to monitoring systems. -
Q: Is this system suitable for axial displacement monitoring?
A: Yes, it can be used for both axial and radial measurement depending on installation geometry. -
Q: How is the probe installed?
A: Via threaded insertion into a sensor port, usually with an M10 × 1 or 3/8” UNF thread, depending on spec. -
Q: Can the sensor withstand vibration during operation?
A: Yes, it is specifically designed for continuous operation in high-vibration environments such as rotating machinery. -
Q: What cable length options are available?
A: This model has a 4.0-meter cable, but other lengths (e.g., 1m, 2m, 5m) are available depending on configuration. -
Q: Is recalibration required after replacing the probe?
A: Typically not, provided the replacement probe has identical specifications and factory calibration. -
Q: Does it support remote monitoring systems?
A: Yes, when connected through CON021, it outputs analog signals that can be fed into SCADA or DCS systems. -
Q: Can it detect shaft rubbing or rotor contact events?
A: Yes, by continuously monitoring shaft displacement, anomalies like rubbing can be detected early.
Related or Same-Series Modells
| Modell | Beschreibung | Cable Length | Tip Diameter |
|---|---|---|---|
| PR6423/000-000+CON011 | 5 mm sensor + legacy CON011 converter | 5 m | 5 mm |
| PR6423/002-030+CON021 | 5 mm probe, 3 m cable, standard monitoring | 3 m | 5 mm |
| PR6423/004-010+CON021 | 5 mm probe for axial thrust measurements | 1 m | 5 mm |
| PR6423/005-010+CON021 | High EMI resistance 5 mm probe | 1 m | 5 mm |
| PR6423/102-000+CON021 | 8 mm probe, 2 m cable for redundant installation | 2 m | 8 mm |
| PR6423/10R-040+CON021 | 8 mm sensor for rack-mounted monitoring systems | 4 m | 8 mm |
Popular Epro Modells
| Modell | Beschreibung | Application | Output Signal |
|---|---|---|---|
| MMS3120/022-100 | Dual-channel monitoring module | Vibration and speed | 4–20 mA / Relay |
| MMS6110/022-100 | Dual-channel Stück for displacement and speed | Turbomachinery monitoring | Voltage/Relay |
| PR9268/301-000 | Seismic velocity transducer | Low-frequency vibration | 4–20 mA |
| PR6424/01CS | Compact high-temp eddy current sensor | Turbine monitoring | With CON modules |
| CON021 | Signal converter for PR6423 sensors | Eddy current probe systems | Voltage (analog) |
| MMS3110/022-000 | Basic monitoring Stück for vibration | General industrial machines | 0–10 V / Relay |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
