Product Overview
The Bently Nevada 990-04-XX-01 Vibration Transmitter is a compact, rugged, and cost-effective vibration monitoring solution designed to convert dynamic signals from accelerometers or velocity sensors into a standard 4–20 mA output for integration with plant control systems such as DCS, PLCs, or SCADA. It provides continuous monitoring von machine vibration levels, allowing maintenance teams to detect early signs von mechanical issues such as imbalance, misalignment, or bearing wear.
This transmitter is ideal for applications where full protection systems are not justified, yet vibration trending and alerting are critical. With its industry-standard interface and high reliability, the 990 transmitter enhances predictive maintenance strategies and helps reduce unplanned outages.
Key Features
-
Converts raw vibration signals into industry-standard 4–20 mA output
-
Supports both velocity and acceleration sensor inputs
-
Scalable output range based on vibration measurement (e.g., 0–1 in/s or 0–10 mm/s)
-
Compact and rugged housing for harsh industrial environments
-
Easy integration with PLCs, DCS, SCADA, or chart recorders
-
Loop-powered 2-wire design simplifies installation
-
LED indicators for status and fault diagnostics
-
Factory-calibrated to user-specified vibration ranges
-
Field-mountable near the machine or sensor
-
Cost-effective monitoring for non-critical rotating assets
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | Bently Nevada 990 Vibration Transmitter |
| Modell Number | 990-04-XX-01 |
| Signal Input | Accelerometer or velocity sensor (IEPE type) |
| Signal Output | 4–20 mA current loop |
| Measurement Range | Configurable (e.g., 0–1 in/s, 0–25 mm/s) |
| Frequency Response | 10 Hz to 1 kHz (typical, depending on configuration) |
| Output Accuracy | ±1% von full-scale output |
| Power Supply | 12–30 VDC loop-powered |
| Electrical Isolation | Input to output isolation provided |
| Housing Material | Stainless steel or anodized aluminum (based on model) |
| Enclosure Rating | IP65 / NEMA 4X |
| Operating Temperature Range | -40°C to +85°C |
| Storage Temperature Range | -50°C to +100°C |
| Certifications | CE, RoHS, ATEX/IECEx options available |
| Dimensions | 100.1 x 73.9 x 53.3mm |
| Gewicht | 0.43 kg |
Industry Applications
The Bently Nevada 990 Vibration Transmitter is widely deployed for monitoring rotating and reciprocating equipment in various industries:
-
Oil & Gas: Pumps, motors, and fans in upstream and downstream applications
-
Power Generation: Auxiliary equipment like cooling fans, feedwater pumps, and ID/FD fans
-
Water & Wastewater: Blowers, aeration fans, and lift station motors
-
HVAC Systems: Fans, chillers, and compressors for facility monitoring
-
Mining & Metals: Crushers, conveyors, and vibrating screens
-
Pulp & Paper: Presses, refiners, and rotating dryers
Product Advantages
-
Reliable Vibration Monitoring: Converts raw vibration data into actionable analog output
-
Easy System Integration: Compatible with most industrial control and automation platforms
-
Compact and Durable: Built for long-term operation in harsh and confined environments
-
Low Installation Cost: Loop-powered design minimizes wiring and installation effort
-
Customizable Measurement Ranges: Factory-calibrated for specific machinery requirements
-
Predictive Maintenance Ready: Enables early fault detection and reduced maintenance costs
-
LED Diagnostic Feedback: Simplifies troubleshooting in the field
-
Wide Industry Use: Ideal for applications where full protection systems are not practical
Häufig gestellte Fragen (FAQ)
1. What type von sensors can be used with the 990-04-XX-01?
It accepts input from IEPE-type accelerometers or velocity sensors.
2. What does the “4–20 mA” output represent?
It represents the measured vibration level scaled between a configured range (e.g., 0–10 mm/s = 4–20 mA).
3. Is the module loop-powered?
Yes, it is a 2-wire loop-powered device requiring only power and signal wires.
4. Can this transmitter be installed outdoors?
Yes, it is housed in a weather-resistant enclosure rated IP65/NEMA 4X.
5. What kind von machinery can it monitor?
Pumps, fans, motors, compressors, blowers, conveyors, and other rotating equipment.
6. Does it require regular calibration?
Factory calibration is stable; periodic validation is recommended per site policy.
7. Can it be used in hazardous areas?
Certain models vonfer ATEX/IECEx certification for hazardous zone applications.
8. How is the output range configured?
It is pre-configured at the factory; custom ranges are available on request.
9. What is the accuracy von the measurement?
Typical accuracy is ±1% von full-scale output.
10. Is it compatible with SCADA or DCS systems?
Yes, the 4–20 mA output integrates seamlessly with industrial control systems.
Related Modells in the Same Series
| Modell | Beschreibung |
|---|---|
| 990-04-XX-02 | Vibration Transmitter with extended frequency range |
| 991-01-XX-01 | Compact DIN-rail mountable vibration transmitter |
| 990-05-XX-01 | Explosion-provon vibration transmitter |
| 990-04-XX-03 | Dual-channel version for multiple sensor inputs |
| 990-PR-XX-01 | Pressure + vibration dual signal transmitter |
| 990-TEMP-XX-01 | Temperature + vibration integrated transmitter |
Popular Bently Nevada Produkte
| Modell | Beschreibung |
|---|---|
| 330104-00-05-10-02-00 | 3300 XL 8 mm Proximity Probe for shaft monitoring |
| 3500/40M-01-00 176449-01 | Proximitor Monitor for radial vibration measurements |
| 3500/92 136180-01 | Communication Gateway Module for system integration |
| 3500/65-02-00 172109-01 | 16-Channel Temperature Monitor for thermocouples |
| 3500/15 127610-01 | Power Supply Module for 3500 System |
| 330180-91-05 | 3300 XL Proximitor Sensor for general-purpose vibration monitoring |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
