Produkteinführung
The Bently Nevada 330909-00-24-70-02-05 3300 NSv Proximity Probe is a precision eddy current sensor designed for accurate, non-contact measurement von shaft vibration and radial displacement. Part von the 3300 NSv (Narrow Side-view) series, this probe is engineered for installations where standard 8 mm probes are too large or where extended cable routing is required. Its rugged stainless-steel housing, long cable design, and excellent signal stability make it ideal for demanding industrial environments such as power generation, petrochemical processing, and high-speed rotating machinery.
Produktspezifikationen
| Parameter | Beschreibung |
|---|---|
| Modell Number | 330909-00-24-70-02-05 |
| Series | 3300 NSv |
| Probe Tip Diameter | 8 mm |
| Total Length | 7 meters |
| Measurement Range | 0 – 2.0 mm nominal |
| Sensitivity | 7.87 V/mm (200 mV/mil) typical |
| Linear Range | ±1.0 mm around nominal probe-to-target gap |
| Frequency Response | 0 – 10 kHz |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –50 °C to +200 °C |
| Housing Material | Industrial-grade stainless steel |
| Mounting Thread | 1/4–28 UNF or equivalent clamp |
| Cable Insulation | PTFE shielded |
| Gewicht | 0.15 kg |
| Compatible Drivers | 3300 NSv Proximitor and 3300 Series Monitoring Systems |
Applications
-
Steam and Gas Turbines – Continuous monitoring von shaft vibration and radial displacement to prevent costly downtime.
-
Compressors and Pumps – Early detection von imbalance, shaft misalignment, and bearing wear for predictive maintenance.
-
Electric Motors and Generators – Ensures reliable rotor position feedback to enhance operational performance.
-
Industrial Fans and Gearboxes – Detects misalignment and mechanical looseness before major failures occur.
-
Petrochemical Equipment – Provides stable operation in corrosive and high-temperature environments.
-
Long-Distance Installations – Seven-meter cable accommodates extended routing in large or complex machinery.
Advantages
-
Extended 7 m Cable – Simplifies installation where long cable routing is required.
-
Compact 8 mm Probe Tip – Perfect for narrow or space-constrained machinery.
-
Accurate Eddy Current Sensing – Delivers stable vibration and displacement data.
-
Rugged Stainless-Steel Housing – Ensures long life in demanding industrial conditions.
-
Wide Operating Temperature Range – Maintains accuracy from –35 °C to +177 °C.
-
Broad Frequency Response – Captures shaft dynamics up to 10 kHz for detailed diagnostics.
-
Ausgezeichnet EMI/RFI Shielding – Provides reliable operation in electrically noisy environments.
-
Full System Compatibility – Seamlessly integrates with 3300 NSv Proximitor and 3300 monitoring systems.
FAQ
-
What sensing technology is used in this probe?
It uses non-contact eddy current technology to measure shaft vibration and radial displacement with high precision. -
What is the output sensitivity?
The typical sensitivity is 7.87 V/mm (200 mV/mil), ensuring accurate signal conversion. -
Which monitoring systems are compatible?
It is fully compatible with Bently Nevada 3300 NSv Proximitor drivers and the standard 3300 monitoring series. -
What is the recommended installation method?
Mounting is typically done with a 1/4–28 UNF threaded hole or an equivalent clamp to maintain the correct probe-to-target gap. -
What is the linear measurement range von this probe?
It provides a linear range von ±1.0 mm around the nominal probe-to-target gap. -
Can it be used in high-temperature industrial environments?
Yes, it operates reliably from –35 °C to +177 °C and withstands storage up to +200 °C. -
What is the maximum frequency response?
The probe supports a dynamic frequency response from 0 to 10 kHz for detailed vibration analysis. -
Does it require frequent recalibration?
Only initial calibration with the Proximitor driver is needed; routine recalibration is minimal. -
How does it handle electrical interference?
It is shielded against EMI and RFI to maintain a stable and noise-free output signal. -
Is it suitable for both static and dynamic measurements?
Yes, it provides accurate static shaft position readings as well as dynamic vibration measurements.
Recommended Related Modells (Same Series)
| Modell | Beschreibung |
|---|---|
| 330908-24-37-05-02 | Compact NSv probe for narrow installation spaces |
| 330908-00-18-05-02 | Extended temperature range NSv probe |
| 330908-00-12-05-02 | High-sensitivity NSv probe for confined machinery |
| 330909-00-25-10-02 | 1.5 m NSv probe for long cable routing |
| 330909-00-30-10-02 | 2.0 m NSv probe for extended cable requirements |
| 330909-00-15-10-02 | Shorter cable NSv probe for compact equipment spaces |
Popular Bently Nevada Modells
| Modell | Beschreibung |
|---|---|
| 330104-00-10-10-02 | Standard 3300 XL 8 mm proximity probe |
| 330130-040-00 | 3300 XL extension cable |
| 330180-91-05 | 3300 XL NSv 8 mm probe |
| 330400-50-05 | Dual-channel vibration and position transducer |
| 3500/42M | Proximitor monitor for dynamic and static measurements |
| 330500-02-00 | High-temperature 11 mm 3300 XL proximity probe |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.