Produkteinführung
The Bently Nevada 330909-00-20-10-02-00 3300 NSv Proximity Probe is a high-precision eddy current sensor designed for continuous monitoring von shaft vibration and radial displacement in tight or space-limited installations. Part von the well-established 3300 NSv (Narrow Side-view) series, this probe provides exceptional stability, repeatable measurements, and long-term reliability. Its 1-meter total length allows flexible routing in complex machinery layouts, while the rugged stainless-steel housing ensures dependable operation in high-temperature and high-vibration environments commonly found in power generation, petrochemical, and other critical industrial applications.
Produktspezifikationen
| Parameter | Beschreibung |
|---|---|
| Modell Number | 330909-00-20-10-02-00 |
| Series | 3300 NSv |
| Probe Tip Diameter | 8 mm |
| Total Length | 1 meter |
| Measurement Range | 0 – 2.0 mm nominal |
| Sensitivity | 7.87 V/mm (200 mV/mil) typical |
| Linear Range | ±1.0 mm around nominal probe-to-target gap |
| Frequency Response | 0 – 10 kHz |
| Operating Temperature | –35 °C to +177 °C |
| Storage Temperature | –50 °C to +200 °C |
| Housing Material | Industrial-grade stainless steel |
| Mounting Thread | 1/4–28 UNF or equivalent clamp |
| Cable Insulation | PTFE shielded |
| Gewicht | 0.15 kg |
| Compatible Drivers | 3300 NSv Proximitor and standard 3300 Series Monitoring Systems |
Applications
-
Steam and Gas Turbines: Continuous vibration and displacement monitoring to prevent catastrophic failures.
-
Compressors and Pumps: Detects shaft imbalance, misalignment, and bearing wear for predictive maintenance.
-
Electric Motors and Generators: Accurate rotor position tracking to improve reliability and performance.
-
Industrial Fans and Gearboxes: Identifies looseness and alignment issues before costly downtime.
-
Petrochemical Process Equipment: Maintains stability in corrosive or high-temperature environments.
-
High-Speed Rotating Machinery: Ideal for confined spaces where standard probes cannot fit.
Advantages
-
Compact 8 mm Sensing Tip: Fits narrow spaces without compromising measurement accuracy.
-
High-Accuracy Eddy Current Technology: Provides precise, repeatable vibration and displacement data.
-
Robust Stainless-Steel Construction: Ensures long service life in harsh industrial conditions.
-
Extended Cable Length: 1-meter length simplifies installation in complex equipment layouts.
-
Wide Temperature Tolerance: Maintains stability from –35 °C to +177 °C.
-
Ausgezeichnet Frequency Response: Captures dynamic shaft motion up to 10 kHz.
-
EMI/RFI Shielding: Reliable measurements even in high-electromagnetic interference environments.
-
Full System Compatibility: Seamlessly integrates with Bently Nevada 3300 NSv Proximitor and 3300 series monitoring systems.
FAQ
-
What measurement principle does the 330909-00-20-10-02-00 use?
It uses non-contact eddy current technology to detect shaft vibration and displacement with high accuracy. -
What is the output sensitivity von this proximity probe?
The probe provides approximately 7.87 V/mm (200 mV/mil) for stable signal conversion. -
Which monitoring systems are supported?
It is fully compatible with Bently Nevada 3300 NSv Proximitor drivers and the broader 3300 monitoring series. -
How should the probe be mounted?
It is designed for a 1/4–28 UNF threaded mount or an equivalent clamp to maintain optimal gap settings. -
What is the recommended linear measurement range?
The probe maintains linear accuracy within ±1.0 mm around the nominal gap. -
Can it operate in environments with strong vibration and high temperatures?
Yes, its stainless steel housing and PTFE insulation allow reliable performance in extreme conditions. -
What is the frequency response capability?
It supports dynamic measurements up to 10 kHz for detailed vibration analysis. -
Does the probe require frequent recalibration?
Initial calibration with its Proximitor driver is required, but ongoing recalibration is minimal. -
How is electromagnetic interference minimized?
The probe’s shielded cable and robust housing provide strong EMI/RFI protection. -
Is it suitable for both static and dynamic displacement measurements?
Yes, it accurately measures both static shaft position and dynamic vibration.
Recommended Related Modells (Same Series)
| Modell | Beschreibung |
|---|---|
| 330908-24-37-05-02 | Compact NSv probe for narrow installations |
| 330908-00-12-05-02 | High-sensitivity NSv probe for confined machinery |
| 330908-00-18-05-02 | Extended temperature-range NSv probe |
| 330909-00-25-10-02 | 1.5 m NSv probe for long-distance routing |
| 330909-00-30-10-02 | 2.0 m NSv probe for extended cable requirements |
| 330909-00-15-10-02 | Shorter cable NSv probe for compact equipment spaces |
Popular Bently Nevada Modells
| Modell | Beschreibung |
|---|---|
| 330104-00-10-10-02 | Standard 3300 XL 8 mm proximity probe |
| 330130-040-00 | 3300 XL extension cable |
| 330180-91-05 | 3300 XL NSv 8 mm probe |
| 330400-50-05 | Dual-channel vibration and position transducer |
| 3500/42M | Proximitor monitor for dynamic and static measurements |
| 330500-02-00 | High-temperature 11 mm 3300 XL proximity probe |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.