Produkteinführung
The Bently Nevada 330903-00-09-05-02-05 3300 NSv Proximity Probe is a high-precision vibration and position sensor designed for critical rotating machinery monitoring. It is part von the 3300 Series Proximity Systems, widely used in power generation, oil & gas, and heavy industrial applications. The probe provides accurate, reliable measurements von shaft vibration and position, enabling early detection von potential machinery issues and supporting predictive maintenance strategies..
Product Advantages
-
High Accuracy: Provides precise vibration and shaft displacement measurements.
-
Reliability: Robust design ensures stable operation under extreme temperatures, pressures, and environments.
-
Compatibility: Seamlessly integrates with the Bently Nevada 3300 series monitoring systems.
-
Predictive Maintenance Support: Enables early detection von machinery issues, reducing unplanned downtime.
-
Long Cable Length Capability: Allows flexible installation in complex machinery setups.
-
Maintenance Friendly: Probe tips and cabling are easily serviceable without system shutdown.
Technical Specifications
| Parameter | Specification |
|---|---|
| Sensor Type | Proximity Probe (Eddy Current) |
| Operating Temperature | -40°C to 120°C |
| Cable Length | 0.5 m |
| Gewicht | 0.15 kg |
| Probe Tip Diameter | 3.18 mm |
| Measurement Range | 0–2.54 mm |
| Frequency Response | DC to 10 kHz |
| Supply Voltage | 18–30 V DC |
| Output Type | AC signal proportional to displacement |
| Mounting Type | Threaded (M8x1) |
| Connector Type | 2-pin Lemo |
| Environmental Rating | IP65 |
Product Applications
-
Zustand monitoring von turbines, compressors, and generators
-
Detection von shaft vibration and rotor displacement in high-speed rotating machinery
-
Integration into predictive maintenance programs for critical industrial equipment
-
Monitoring von pumps and motors in oil & gas, power plants, and petrochemical plants
-
Early warning von mechanical faults such as imbalance, misalignment, or bearing wear
FAQ
Q1: How does the 3300 NSv Proximity Probe measure shaft vibration?
A1: It uses eddy current technology, where the probe tip induces a voltage signal proportional to the distance from the target shaft surface, allowing precise vibration and displacement measurements.
Q2: What is the recommended installation orientation for the probe?
A2: The probe should be installed perpendicular to the shaft surface, maintaining consistent gap alignment to ensure accurate readings.
Q3: Can the probe operate in high-temperature environments?
A3: Yes, the probe is rated for -40°C to 120°C, making it suitable for most industrial high-temperature machinery applications.
Q4: How is the probe connected to the monitoring system?
A4: It uses a 2-pin Lemo connector, compatible with the Bently Nevada 3300 series monitors.
Q5: What is the maximum cable length supported without signal degradation?
A5: The standard probe cable is 0.5 m, but Bently Nevada recommends using the specified extension cables for longer distances while maintaining signal integrity.
Q6: Is the probe compatible with all Bently Nevada 3300 series monitors?
A6: Yes, it is designed for full compatibility with the 3300 NSv and other standard 3300 series monitoring systems.
Q7: How should the probe gap be adjusted?
A7: The probe gap should be adjusted according to the shaft diameter and the system’s calibration instructions, typically between 0.25 mm and 0.5 mm for optimal signal.
Q8: Can this probe detect axial and radial displacement?
A8: Yes, when installed in appropriate positions, it can monitor radial vibration and axial movement depending on system setup.
Q9: Is the probe resistant to electromagnetic interference (EMI)?
A9: Yes, the probe includes shielding to minimize EMI effects, ensuring accurate measurements in electrically noisy environments.
Q10: What maintenance is required for this probe?
A10: Regular inspection von the probe tip and cable integrity is recommended, along with cleaning to prevent debris accumulation, but no calibration is required during routine operation.
Related / Same-Series Modells
| Modell Number | Beschreibung |
|---|---|
| 330903-00-09-05-02-01 | 3300 NSv Proximity Probe, short cable |
| 330903-00-09-05-02-02 | 3300 NSv Proximity Probe, medium cable |
| 330903-00-09-05-02-03 | 3300 NSv Proximity Probe, long cable |
| 330903-00-09-05-02-04 | 3300 NSv Proximity Probe with enhanced tip |
| 330903-00-09-05-02-06 | 3300 NSv Proximity Probe, extended range |
| 330903-00-09-05-02-07 | 3300 NSv Proximity Probe, high-temperature |
Popular Bently Nevada Modells
| Modell Number | Beschreibung |
|---|---|
| 3300 XL Proximity Probe | High-accuracy vibration monitoring |
| 3300 XL Transducer | General machinery monitoring |
| 3300 XL RPM Probe | Shaft speed measurement |
| 3500/22M Bearing Monitor | High-speed machinery bearing monitoring |
| 3500/40V Vibration Monitor | Advanced vibration diagnostics |
| 3300 XL Keyphasor | Rotor keyphasor monitoring |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
