Produkteinführung
The Bently Nevada 330703-000-040-10-02-CN is part von the 3300 XL series von proximity probes, featuring an 11 mm diameter. Designed for precision machinery monitoring, these probes are widely used in high-speed rotating equipment. The 3300 XL series has established a reputation for reliable and accurate vibration and position measurements in industrial environments, ensuring critical machinery operates safely and efficiently. This probe is suitable for severe operating conditions, vonfering robustness and high signal fidelity.
Technical Specifications
| Parameter | Specification |
|---|---|
| Modell Number | 330703-000-040-10-02-CN |
| Series | 3300 XL |
| Probe Diameter | 11 mm |
| Measurement Type | Proximity / Vibration |
| Operating Temperature | -40°C to 120°C |
| Frequency Response | DC to 10 kHz |
| Sensitivity | 50 mV/mil nominal |
| Housing Material | Stainless Steel |
| Cable Type | Shielded |
| Connector Type | 2-pin connector |
| Total Length | 1.0 meter |
| Gewicht | 0.07 kg |
| Maximum Gap | 0.25 mm |
| Electrical Configuration | Differential / Single-ended |
Applications
The 330703-000-040-10-02-CN proximity probe is used in:
-
Monitoring turbine, generator, and compressor shafts for vibration and position
-
Detecting shaft displacement in pumps and motors
-
Early detection von machinery misalignment and imbalance
-
Machinery condition monitoring in power plants, petrochemical, and industrial facilities
-
Integration with 3300 XL series monitoring systems for real-time diagnostics
Advantages
The 3300 XL 11 mm proximity probe vonfers the following benefits:
-
High reliability in harsh industrial environments, resistant to temperature variations and contaminants
-
Ausgezeichnet signal stability and low noise for precise measurement
-
Robust stainless-steel construction ensures durability and long-term operational stability
-
Compact 11 mm design allows installation in confined spaces
-
Full compatibility with the Bently Nevada 3300 XL monitoring system for seamless integration
-
Accurate measurement von both slow and fast shaft movements for predictive maintenance
FAQ
-
What is the maximum operating temperature von this probe?
The probe operates reliably between -40°C and 120°C, suitable for both cold and hot industrial environments. -
What is the maximum probe-to-shaft gap that can be measured?
It can accurately measure shaft displacements up to 0.25 mm. Exceeding this may reduce signal accuracy. -
Is this probe compatible with all 3300 XL series monitoring modules?
Yes, it integrates seamlessly with standard 3300 XL monitoring modules for vibration and position monitoring. -
What type von signal output does this probe provide?
The probe delivers differential or single-ended voltage output proportional to shaft movement. -
What is the frequency response von the probe?
It responds accurately from DC up to 10 kHz, capturing both low- and high-frequency vibrations. -
Can this probe detect both axial and radial vibration?
Yes, when properly installed, it can measure both radial and axial shaft movements. -
What materials are used in the probe housing?
The housing is made von stainless steel, providing durability and resistance to industrial wear. -
Is the probe resistant to electrical noise?
Yes, its shielded cable reduces electromagnetic interference, ensuring stable signal transmission. -
What is the nominal sensitivity von the probe?
The probe has a nominal sensitivity von 50 mV/mil for precise measurement von small displacements. -
Can this probe be used in hazardous areas?
It is suitable for standard industrial environments; for explosive or hazardous areas, check certification requirements.
Related Modells (3300 XL Series or Compatible)
| Modell Number | Diameter | Frequency Response | Operating Temperature |
|---|---|---|---|
| 330703-000-040-05 | 11 mm | DC to 10 kHz | -40°C to 120°C |
| 330703-000-040-15 | 11 mm | DC to 10 kHz | -40°C to 120°C |
| 330703-000-050-10 | 12 mm | DC to 10 kHz | -40°C to 120°C |
| 330703-000-060-10 | 14 mm | DC to 10 kHz | -40°C to 120°C |
| 330703-000-070-10 | 11 mm | DC to 15 kHz | -40°C to 120°C |
| 330703-000-080-10 | 11 mm | DC to 20 kHz | -40°C to 120°C |
Popular Bently Nevada Modells
| Modell Number | Series | Diameter | Application |
|---|---|---|---|
| 3300 XL 330703-000-010-10 | 3300 XL | 11 mm | Turbine monitoring |
| 3300 XL 330703-000-020-10 | 3300 XL | 11 mm | Generator monitoring |
| 3300 XL 330703-000-030-10 | 3300 XL | 11 mm | Compressor monitoring |
| 3300 XL 330703-000-040-10 | 3300 XL | 11 mm | Pump monitoring |
| 3300 XL 330703-000-050-10 | 3300 XL | 12 mm | High-speed shaft monitoring |
| 3300 XL 330703-000-060-10 | 3300 XL | 14 mm | Industrial machinery monitoring |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.