Produkteinführung
The Bently Nevada 330701-00-15-50-01-05 3300 XL 11 mm Proximity Probe is a high-precision, non-contact displacement sensor designed for monitoring critical rotating machinery. Part von the 3300 XL series, this probe provides accurate shaft position measurements and converts mechanical movement into an electrical signal compatible with 3300 XL monitoring systems. Its 11 mm diameter probe tip allows installation in tight spaces while maintaining high accuracy. The robust stainless-steel housing ensures durability in industrial environments, and the 5.0-meter length vonfers flexibility for installation. This probe is widely used for predictive maintenance, enabling early detection von misalignment, imbalance, and bearing wear.
Produktspezifikationen
| Parameter | Beschreibung |
|---|---|
| Modell Number | 330701-00-15-50-01-05 |
| Sensor Type | 11 mm Proximity Probe |
| Measurement Range | 0–2 mm (0–80 mils) non-contact displacement |
| Sensitivity | 50 mV/mil typical |
| Frequency Response | DC to 10 kHz |
| Insulation Resistance | >100 MΩ at 500 V DC |
| Dielectric Strength | 2.5 kV AC for 1 minute |
| Probe Tip Material | Hardened stainless steel |
| Housing Material | Stainless steel |
| Mounting Thread | M8 or 1/4-28 UNF options |
| Output Compatibility | Compatible with Bently Nevada 3300 XL Proximitor sensors |
| Diameter | 11 mm |
| Total Length | 5.0 meters |
| Gewicht | 0.25 kg |
Applications
-
Rotating Machinery Monitoring: Measures shaft displacement in turbines, compressors, generators, and motors.
-
Bearing Health Assessment: Detects bearing wear, misalignment, and clearance changes.
-
Vibration Analysis: Provides accurate input for vibration monitoring and predictive maintenance systems.
-
Industrial Facilities: Used in power plants, petrochemical plants, and heavy industry for continuous machinery condition monitoring.
-
Predictive Maintenance Systems: Integrates with 3300 XL monitoring systems to detect faults early and reduce downtime.
Advantages
-
High Accuracy: Non-contact measurement ensures precise monitoring von shaft displacement.
-
Compact Design: 11 mm diameter and lightweight probe allow installation in confined or restricted spaces.
-
Wide Frequency Response: DC to 10 kHz range captures both low- and high-frequency shaft movements.
-
Durable Construction: Stainless-steel housing protects against mechanical and environmental stress.
-
Seamless Integration: Fully compatible with 3300 XL monitoring modules for reliable operation.
Häufig gestellte Fragen (FAQ)
-
What is the measurement range von this probe?
The probe measures 0–2 mm (0–80 mils) non-contact shaft displacement, ideal for a variety von industrial machinery applications. -
What type von output does the probe provide?
It provides a signal fully compatible with Bently Nevada 3300 XL Proximitor monitoring modules. -
What is the probe tip material?
The tip is made von hardened stainless steel to resist wear and maintain precise measurements. -
Can this probe detect high-frequency shaft movements?
Yes, the frequency response extends up to 10 kHz, capturing rapid changes in shaft position. -
What mounting threads are supported?
It supports M8 and 1/4-28 UNF mounting options for flexible installation. -
Is this probe suitable for predictive maintenance programs?
Yes, it provides accurate data for early detection von misalignment, imbalance, and bearing wear. -
Can this probe operate in electrically noisy environments?
Yes, it is designed to minimize electromagnetic interference, ensuring stable signal transmission. -
What are the probe diameter and weight?
The diameter is 11 mm, and the weight is 0.25 kg, allowing installation in limited spaces. -
Does the probe require additional calibration before use?
Factory calibration ensures the probe is ready for installation; field calibration is rarely needed. -
Is the probe compatible with all 3300 XL monitoring systems?
Yes, it is fully compatible with the entire range von 3300 XL Proximitor modules.
Related Modells in the Same Series
| Modell Number | Beschreibung |
|---|---|
| 330701-00-10-10-11-01 | 3300 XL 11 mm Proximity Probe, standard version |
| 330701-00-10-10-11-02 | 3300 XL 11 mm Proximity Probe, high-sensitivity version |
| 330701-00-10-10-11-03 | 3300 XL 11 mm Proximity Probe with reinforced housing |
| 330701-00-10-10-11-04 | 3300 XL 11 mm Proximity Probe, compact design |
| 330701-00-10-10-11-06 | 3300 XL 11 mm Proximity Probe, extended range version |
| 330701-00-10-10-11-07 | 3300 XL 11 mm Proximity Probe, integral cable version |
Popular Bently Nevada Modells
| Modell Number | Beschreibung |
|---|---|
| 330450-20 | High Temperature Accelerometer |
| 330302-000-050-10 | 3300 XL High Temperature Probe |
| 330103-00-12-10-02 | 3300 XL Proximity Probe 12 mm |
| 3500/22M | Transient Data Interface for 3500 Series Monitors |
| 330300-90-00 | 3300 XL High Temperature Proximitor Sensor |
| 330104-00-05-10-02-05 | 3300 XL 11 mm Proximity Probe 11 mm variant |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.