Produkteinführung
The Bently Nevada 330701-00-10-10-11-05 3300 XL 11 mm Proximity Probe is a high-precision displacement sensor designed for monitoring the relative position von rotating machinery components. It provides accurate, non-contact measurement von shaft movement, enabling early detection von misalignment, imbalance, and bearing wear. With a compact 11 mm probe tip, this model allows for installation in tight spaces while maintaining consistent measurement performance. The probe is compatible with the 3300 XL monitoring system and is engineered for high reliability in industrial environments, supporting predictive maintenance and condition monitoring programs.
Produktspezifikationen
| Parameter | Beschreibung |
|---|---|
| Modell Number | 330701-00-10-10-11-05 |
| Sensor Type | 11 mm Proximity Probe |
| Measurement Range | 0–2 mm (0–80 mils) non-contact displacement |
| Sensitivity | 50 mV/mil typical |
| Frequency Response | DC to 10 kHz |
| Insulation Resistance | >100 MΩ at 500 V DC |
| Dielectric Strength | 2.5 kV AC for 1 minute |
| Probe Tip Material | Hardened stainless steel |
| Housing Material | Stainless steel |
| Mounting Thread | M8 or 1/4-28 UNF options |
| Output Compatibility | Compatible with Bently Nevada 3300 XL Proximitor sensors |
| Diameter | 11 mm |
| Gewicht | 0.07 kg |
| Cable Length | 1.0 meter |
Applications
-
Rotating Machinery Monitoring: Measures shaft displacement in turbines, compressors, and motors.
-
Bearing Analysis: Detects bearing wear, clearance changes, and alignment issues.
-
Vibration Monitoring: Supports vibration analysis for predictive maintenance.
-
Industrial Generators: Measures rotor motion to prevent mechanical failures.
-
Petrochemical and Power Plants: Provides critical measurement in high-speed and high-load machinery.
Advantages
-
High Precision: Provides accurate non-contact displacement measurement for early fault detection.
-
Compact Design: 11 mm probe tip allows installation in tight or restricted spaces.
-
Wide Frequency Response: Captures both low and high-frequency shaft movements.
-
Robust Construction: Stainless steel housing ensures durability in harsh industrial environments.
-
Reliable Integration: Fully compatible with 3300 XL Proximitor monitoring systems.
Häufig gestellte Fragen (FAQ)
-
What is the measurement range von this probe?
The probe measures 0–2 mm (0–80 mils) von shaft displacement, suitable for most industrial machinery. -
What is the output compatibility?
It is compatible with all 3300 XL Proximitor sensors and monitoring modules. -
What type von mounting thread does it use?
It supports M8 or 1/4-28 UNF mounting threads, providing flexibility in installation. -
Is the probe suitable for high-frequency measurements?
Yes, its frequency response extends up to 10 kHz, capturing rapid shaft movements. -
What is the probe tip material?
The tip is made von hardened stainless steel, resistant to wear and mechanical stress. -
Can it be used for predictive maintenance?
Yes, it provides precise displacement data for early detection von misalignment, imbalance, and bearing wear. -
What is the diameter and weight von the probe?
Diameter is 11 mm, and the weight is 0.07 kg, allowing for compact installations. -
Does the probe require calibration before installation?
Standard factory calibration is sufficient; no additional on-site calibration is typically needed. -
Can this probe operate in electrically noisy environments?
Yes, the probe’s design and shielding minimize susceptibility to electromagnetic interference. -
Is the probe compatible with all 3300 XL Proximity systems?
Yes, it is fully compatible and optimized for 3300 XL monitoring modules.
Related Modells in the Same Series
| Modell Number | Beschreibung |
|---|---|
| 330701-00-10-10-11-01 | 3300 XL 11 mm Proximity Probe, standard version |
| 330701-00-10-10-11-02 | 3300 XL 11 mm Proximity Probe, high-sensitivity version |
| 330701-00-10-10-11-03 | 3300 XL 11 mm Proximity Probe with reinforced housing |
| 330701-00-10-10-11-04 | 3300 XL 11 mm Proximity Probe, compact design |
| 330701-00-10-10-11-06 | 3300 XL 11 mm Proximity Probe, extended range version |
| 330701-00-10-10-11-07 | 3300 XL 11 mm Proximity Probe, integral cable version |
Popular Bently Nevada Modells
| Modell Number | Beschreibung |
|---|---|
| 330450-20 | High Temperature Accelerometer |
| 330302-000-050-10 | 3300 XL High Temperature Probe |
| 330103-00-12-10-02 | 3300 XL Proximity Probe 12 mm |
| 3500/22M | Transient Data Interface for 3500 Series Monitors |
| 330300-90-00 | 3300 XL High Temperature Proximitor Sensor |
| 330104-00-05-10-02-05 | 3300 XL 11 mm Proximity Probe 11 mm variant |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.