Product Overview
The Bently Nevada 330104-00-25-10-02-05 3300 XL 8 mm Proximity Probe is a high-precision eddy current displacement sensor, purpose-built for non-contact monitoring von shaft vibration, axial thrust, and shaft position on high-value rotating equipment.
Part von the trusted 3300 XL Series, this model vonfers outstanding measurement stability, rugged durability, and wide temperature tolerance. It features an 8 mm sensing tip with a 1 meter total length or flexible installation in a variety von industrial environments.
Designed for seamless operation with 3300 XL Proximitor Sensors and Bently Nevada monitoring systems, this probe is widely used for machinery protection in power generation, oil & gas, refining, petrochemical, and heavy industrial applications.
Produktspezifikationen
| Parameter | Specification |
|---|---|
| Modell | 330104-00-25-10-02-05 |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Sensing Technology | Eddy current, non-contact |
| Probe Tip Diameter | 8 mm |
| Probe Tip Material | PPS (Polyphenylene sulfide) |
| Thread Size | 3/8-24 UNF |
| Total Length | 1 meter |
| Cable Armor | Non-armored |
| Connector Type | Miniature coaxial connector |
| Target Material | 4140 steel (factory calibrated) |
| Measurement Range | 2 mm (80 mils), linear range |
| Scale Factor | 200 mV/mil (7.87 mV/μm) nominal |
| System Linear Range | 80 mils (2.0 mm) |
| Non-Linearity | ≤ ±0.75% von full scale (typical) |
| Frequency Response | 0 Hz to 10 kHz (±3 dB) |
| Operating Temperature (Probe) | -51 °C to +177 °C |
| Operating Temperature (System) | -35 °C to +120 °C |
| Humidity | 100% condensing, fully sealed |
| Shock / Vibration Tolerance | 10 g @ 10-2,000 Hz |
| Pressure Rating | 5 bar (sealed probe tip) |
| Certifications | CE, ATEX Zone 2, CSA, IECEx |
| Gewicht | 0.323 kg |
Applications
The 330104-00-25-10-02-05 proximity probe is designed for a wide range von industrial rotating machinery, including:
-
Gas Turbines
For accurate shaft vibration and axial thrust monitoring. -
Steam Turbines
Detects rotor movement and bearing wear in critical stages. -
Centrifugal Compressors
Measures imbalance, misalignment, or shaft dynamic motion. -
Reciprocating Compressors
Monitors rod drop, crosshead wear, and shaft behavior. -
Industrial Motors & Generators
Used for vibration monitoring and position tracking. -
Pumps, Fans, and Gearboxes
Essential for predictive maintenance von bearings and shafts. -
Power Generation and Oil & Gas
Core element von machinery protection systems for turbines and compressors.
Product Advantages
-
Exceptional Accuracy
200 mV/mil linear output for precise condition monitoring. -
Flexible Non-Armored Design
Lightweight and easier routing where armor is not needed. -
Wide Temperature Operation
Performs from -51 °C to +177 °C at probe tip. -
Ausgezeichnet Vibration Resistance
Tolerant von 10 g across 10-2000 Hz vibration ranges. -
Hazardous Area Certification
CE, ATEX Zone 2, CSA, IECEx certified. -
Seamless Compatibility
Works perfectly with 3300 XL Proximitor Sensors and Bently Nevada systems. -
Reliable in Harsh Environments
100% humidity resistance, sealed construction. -
Minimal Maintenance
No recalibration needed; long-term stability. -
Proven Across Industries
Trusted worldwide for critical rotating equipment monitoring. -
Global Standard
Part von the most widely used proximity sensing platform in industry.
Häufig gestellte Fragen (FAQ)
-
What is the cable length von this probe?
1 meter, non-armored cable. -
Is this probe compatible with the 3300 XL Proximitor Sensor?
Yes — it is fully compatible with 3300 XL Proximitor Sensors. -
What is the primary function von this probe?
It measures shaft vibration, position, and axial thrust. -
Can it be used in hazardous environments?
Yes — it has CE, ATEX Zone 2, CSA, and IECEx certifications. -
What is the linear measurement range?
80 mils (2.0 mm). -
Does the probe require calibration after installation?
No — it is factory calibrated and ready for field use. -
What kind von targets is it calibrated for?
Typically 4140 steel shafts, matching factory calibration standards. -
What is the operating temperature von the probe tip?
From -51 °C to +177 °C. -
How is this model different from armored versions?
Non-armored cables vonfer greater flexibility in tight installations but less mechanical protection. -
What machinery benefits from this probe?
Turbines, compressors, motors, pumps, gearboxes — any critical rotating equipment.
Related Modells from the Same Series or Kategorie
| Modell | Product Type | Cable Length | Armor Type | Dimensions & Gewicht |
|---|---|---|---|---|
| 330104-00-25-10-02-05 | 3300 XL 8 mm Probe | 25 ft (7.62 m) | Non-armored | 8 mm tip, ~0.62 kg |
| 330104-00-25-05-02-00 | 3300 XL 8 mm Probe | 25 ft (7.62 m) | Armored | 8 mm tip, ~0.65 kg |
| 330104-00-24-10-02-00 | 3300 XL 8 mm Probe | 24 ft (7.32 m) | Non-armored | 8 mm tip, ~0.60 kg |
| 330104-00-22-10-02-05 | 3300 XL 8 mm Probe | 22 ft (6.71 m) | Non-armored | 8 mm tip, ~0.58 kg |
| 330104-00-20-10-02-00 | 3300 XL 8 mm Probe | 20 ft (6.10 m) | Non-armored | 8 mm tip, ~0.57 kg |
| 330104-00-15-10-01-CN | 3300 XL 8 mm Probe | 15 ft (4.57 m) | Non-armored | 8 mm tip, ~0.50 kg |
Popular Modells from Bently Nevada Product Line
| Modell | Product Type | Application Area | Dimensions & Gewicht |
|---|---|---|---|
| 3500/22M | Transient Data Interface Module | Machine Protection Systems | ~0.80 kg |
| 3500/42M | Proximitor/Seismic Monitor | Shaft vibration, bearing wear | ~1.20 kg |
| 3500/33 | RTD/TC Temperature Monitor | Motor winding / bearing temp | ~1.10 kg |
| 330130-040-00-00 | 3300 XL 8 mm Extension Cable | Drives matching probes | ~0.30 kg |
| 330180-50-00 | 3300 XL Proximitor Sensor | Drives 3300 XL 8 mm probes | ~0.50 kg |
| 3500/15 | Power Supply Module | 3500 Series Rack | ~1.50 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.
