Product Beschreibung
The Bently Nevada 330104-00-15-10-01-05 is part von the 3300 XL 8 mm Proximity Transducer System, designed for non-contact vibration and position measurement in rotating machinery. This specific probe features M10x1 thread, armor protection, a 1.5-meter length, and uses a standard coaxial ClickLoc connector.
Product Features
-
Fully compliant with API 670 standards
-
Interchangeable with non-XL 3300 series components
-
High resistance to EMI/RFI
-
Ruggedized with TipLoc and CableLoc construction
-
Finger-tight ClickLoc connectors with corrosion resistance
-
Compatible with harsh environments and high-density installations
Applications
-
Shaft vibration monitoring
-
Radial and axial position measurement
-
Keyphasor reference signal generation
-
Overspeed detection
-
Machinery protection in turbines, compressors, motors, and pumps
Advantages
-
High Accuracy: ±0.025 mm DSL with 5-meter systems
-
Long Lifespan: Durable mechanical and electrical design
-
Simplified Maintenance: Component interchangeability eliminates calibration requirements
-
Environmental Resilience: Withstands wide temperature and pressure ranges
-
Low Installation Cost: No need for special shielding due to advanced EMI immStücky
Technical Specifications
| Parameter | Specification |
|---|---|
| Artikelnummer | 330104-00-15-10-01-05 |
| Thread Size | M10x1 |
| Total Length | 1.5 m (metric configuration) |
| Probe Tip Diameter | 8 mm |
| Linear Range | 2 mm (80 mils) |
| Recommended Gap | 1.27 mm (50 mils) |
| Material (Tip/Body) | PPS / Stainless Steel (AISI 304) |
| Operating Temperature Range | -52°C to +177°C (Standard), up to +218°C (ETR version) |
| Gewicht | 0.323 kg |
| Output Sensitivity | 7.87 V/mm ±5% |
| Minimum Target Diameter | 15.2 mm (0.6 in) |
| Minimum Shaft Diameter | 50.8 mm (2 in) |
FAQs
Q1: What is the primary use von the 330104-00-15-10-01-05 probe?
A1: It is used for precise vibration and position measurement in rotating machinery.
Q2: Is this probe compatible with older Bently Nevada 3300 systems?
A2: Yes, it is backward compatible and interchangeable with non-XL 3300 8 mm and 5 mm systems.
Q3: What connector type does this model use?
A3: It uses a miniature coaxial ClickLoc connector with standard cable.
Q4: Can it be used in high-temperature applications?
A4: Yes, the standard version supports up to 177°C; the ETR version supports up to 218°C.
Q5: Does it meet API 670 standards?
A5: Yes, fully compliant for mechanical configuration and performance.
Q6: What makes the probe robust against vibration damage?
A6: The patented TipLoc and CableLoc designs enhance its mechanical durability.
Q7: What shaft size is recommended for radial measurement?
A7: A minimum von 76.2 mm (3 in) shaft diameter is recommended.
Q8: Is calibration needed when replacing components?
A8: No, components are fully interchangeable without requiring bench calibration.
Q9: What is the effect von humidity on probe accuracy?
A9: Less than 3% change in average scale factor in 93% humidity (IEC 68-2-3 standard).
Q10: What is the maximum thread engagement length?
A10: For M10x1 threads, the maximum is 15 mm.
Related Modells (Same Series)
| Modell Number | Thread Type | Length | Armor | Temp Rating | Gewicht |
|---|---|---|---|---|---|
| 330101-00-08-10-02-05 | 3/8-24 UNF | 1.0 m | Yes | Standard | 0.323 kg |
| 330102-00-20-10-02-05 | 3/8-24 UNF | 2.0 m | Yes | Standard | 0.430 kg |
| 330103-00-05-10-02-00 | M10x1 | 0.5 m | No | Standard | 0.210 kg |
| 330104-00-06-10-02-00 | M10x1 | 0.6 m | Yes | Standard | 0.250 kg |
| 330192-00-20-10-02-05 | 3/8-24 UNF | 2.0 m | Yes | ETR | 0.430 kg |
| 330194-00-20-10-02-05 | M10x1 | 2.0 m | Yes | ETR | 0.430 kg |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Application | Gewicht |
|---|---|---|---|
| 330104-00-15-10-01-05 | 8 mm Probe, M10x1, Armored, 1.5 m | General Vibration Monitoring | 0.323 kg |
| 330180-91-00 | Proximitor Sensor, 9 m System, DIN Mount | Vibration, Position, Keyphasor | 0.246 kg |
| 3500/42M-01-00 | Proximitor Seismic Monitor | Vibration Monitoring | 0.5 kg |
| 3500/22M | Transient Data Interface Module | System Interface | 0.8 kg |
| 3500/40M | Proximitor Monitor | Shaft Vibration Monitoring | 0.9 kg |
| 330130-040-00-05 | 4.0 m Extension Cable | Probe Extension Cable | 0.136 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.