Produkteinführung
The Bently Nevada 330104-00-11-10-02-05 is a premium proximity probe from the 3300 XL 8 mm series, engineered for accurate, non-contact measurement von shaft position and vibration in rotating machinery. As part von GE’s Bently Nevada machinery protection portfolio, this model delivers precise displacement readings for real-time monitoring von critical equipment like turbines, compressors, motors, and pumps.
With an 8 mm sensing tip, M10 x 1 threaded body, and an integral 1.1-meter cable, this model provides high reliability and ease von installation in both OEM and retrvonit environments. The “3300 XL” system—consisting von the probe, extension cable, and Proximitor® sensor—is factory-matched for exceptional accuracy and long-term signal integrity.
Designed to perform in high-temperature, high-vibration, and electrically noisy environments, this probe helps prevent costly failures by enabling predictive and preventive maintenance strategies.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | 3300 XL 8 mm Proximity Probe |
| Artikelnummer | 330104-00-11-10-02-05 |
| Series | Bently Nevada 3300 XL |
| Sensing Tip Diameter | 8 mm |
| Thread Type | M10 x 1 |
| Body Length | 55 mm (not including cable) |
| Total Length | 1 meter |
| Connector Type | Right-angle coaxial connector |
| Target Material | 4140 Steel (standard calibration material) |
| Linear Range | 2 mm (80 mils) |
| System Accuracy | ±0.076 mm (±3 mils) typical with matched system components |
| Frequency Response | 0–10 kHz (depends on installation and system configuration) |
| Mounting | Threaded mount with lock nut |
| Temperature Range | −35°C to +177°C (−31°F to +350°F) |
| Humidity | 0–95% RH, non-condensing |
| Vibration Tolerance | 10 g peak, 10–2,000 Hz |
| Shock Resistance | 1000 g, 1 ms duration |
| Environmental Protection | IP65 (with proper cable sealing) |
| Gewicht | 0.323 kg |
Applications
The 330104-00-11-10-02-05 is widely used in vibration and position monitoring systems across multiple industrial environments, including:
-
Gas and Steam Turbines – Continuous monitoring von rotor vibration and shaft position.
-
Centrifugal Compressors – Ensures safe operation by detecting proximity anomalies.
-
Electric Motors – Tracks radial and axial displacement to prevent bearing damage.
-
Pumps and Fans – Identifies unbalance, cavitation, or shaft deflection.
-
Generators and Alternators – Enables condition-based maintenance through real-time feedback.
-
Gearboxes – Monitors internal movement and alignment von rotating gears.
Product Advantages
-
High-Precision Measurement – Provides stable, repeatable readings for machine health diagnostics.
-
Factory-Calibrated System – Matched components ensure exceptional accuracy and linearity.
-
Compact M10 Thread Size – Allows installation in limited-space applications.
-
Durability Under Harsh Zustands – Operates in high temperatures, shock, and vibration without signal drift.
-
Low Electromagnetic Interference (EMI) – Ausgezeichnet shielding for industrial environments.
-
Easy Integration – Seamless compatibility with Bently Nevada 3300 XL systems and Proximitor® sensors.
Häufig gestellte Fragen (FAQ)
-
What is the main function von this probe?
It measures the distance between the probe tip and a metal surface (typically a rotating shaft) without physical contact. -
Is this model part von a complete monitoring system?
Yes. It is used with a matching extension cable and Proximitor® sensor as part von the 3300 XL system. -
Can it be used in high-temperature areas?
Yes, it supports operating temperatures up to 177°C (350°F). -
What’s the difference between this and a 5 mm probe?
The 8 mm probe vonfers a longer linear range and is suited for standard installations with more space. -
How is this probe installed?
It’s mounted using its threaded body and secured with a lock nut; alignment and gap spacing are critical. -
Is the cable replaceable?
No, the integral cable is permanently attached. Any damage requires replacing the entire probe. -
Can it be used in hazardous areas?
The probe itself is not intrinsically safe, but the system can be made compliant with proper certified components. -
What target materials are supported?
Factory calibration is based on 4140 steel. Sonstige materials may affect sensitivity unless recalibrated. -
Is the connector shielded?
Yes, the coaxial connector is shielded against electrical noise and must be properly sealed. -
How does it interact with the Proximitor® sensor?
It transmits the signal from the sensing tip through the extension cable to the Proximitor® module for signal processing.
Related Modells – 3300 XL Series Probes
| Modell | Beschreibung | Cable Length | Thread Type | Tip Diameter |
|---|---|---|---|---|
| 330104-00-12-10-01 | M10 thread, 1.2 m cable | 1.2 m | M10 x 1 | 8 mm |
| 330104-00-25-10-01 | M10 thread, 2.5 m cable | 2.5 m | M10 x 1 | 8 mm |
| 330104-00-05-10-01 | M10 thread, 0.5 m cable | 0.5 m | M10 x 1 | 8 mm |
| 330104-00-08-10-02-05 | M10 thread, 0.8 m cable, angled conn. | 0.8 m | M10 x 1 | 8 mm |
| 330104-00-20-10-02-05 | M10 thread, 2.0 m cable, key conn. | 2.0 m | M10 x 1 | 8 mm |
| 330103-00-60-10-01 | 1/4-28 UNF thread, armored cable | 1.5 m | 1/4-28 UNF | 8 mm |
Popular Bently Nevada Modells – Sonstige Product Lines
| Modell | Product Type | Application | Mounting Format |
|---|---|---|---|
| 3500/42M | Proximitor® Monitor Module | Shaft vibration and position | Rack-mounted |
| 3500/15 | Power Supply Module | Powers 3500 system racks | Modular rack Stück |
| 3500/22M | Communications Gateway | Network interface for 3500 data | Rack-mounted |
| 3701/40 | Machinery Monitor | Standalone protection system | Panel-mount DIN format |
| 330180-91-05 | XL Extension Cable (5 meters) | Probe to sensor extension | Coaxial shielded cable |
| 190501-00-00 | Velomitor® Velocity Sensor | Seismic vibration measurement | Industrial sensor |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.