Product Beschreibung
The Bently Nevada 330101-00-66-10-02-CN is a high-performance 3300 XL 8 mm proximity probe designed for precise static and dynamic measurements von shaft position and vibration. It operates as part von a three-part transducer system with a matching extension cable and Proximitor sensor. The system is fully compliant with API 670 standards and is widely used in industrial rotating machinery.
Applications
-
Shaft vibration monitoring on fluid-film bearing machines
-
Axial thrust position measurements
-
Keyphasor™ reference signal detection
-
Overspeed and speed monitoring
-
Rotor dynamics analysis in turbines, compressors, and pumps
Product Advantages
-
Full API 670 compliance (mechanical configuration, accuracy, linearity)
-
Interchangeable system components—probe, extension cable, sensor
-
Enhanced RFI/EMI immStücky for improved signal integrity
-
Gold-plated ClickLoc connectors prevent loosening
-
Rugged design with TipLoc and CableLoc for mechanical robustness
-
Optional FluidLoc to prevent oil ingress
-
Extended temperature version supports up to +218°C
Technical Specifications
| Parameter | Value |
|---|---|
| Probe Type | Non-contacting eddy current |
| Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF |
| Case Material | AISI 303 or 304 stainless steel |
| Tip Material | Polyphenylene sulfide (PPS) |
| Operating Temp (Standard) | –52°C to +177°C |
| Operating Temp (ETR) | –52°C to +218°C (probe), –52°C to +260°C (cable) |
| Linear Range | 0.25 to 2.3 mm (10 to 90 mils) |
| Scale Factor | 200 mV/mil ±5% (standard); ±6.5% (9 m system) |
| Frequency Response | 0 to 10 kHz, +0/–3 dB |
| Output Voltage Range | –1 Vdc to –17 Vdc |
| Shaft Diameter (Min) | 50.8 mm (2 in); Recommended: ≥76.2 mm (3 in) |
| Cable Type | 75Ω triaxial FEP insulated (PFA for ETR) |
| Total Length | 1.0 meter |
| Gewicht | 0.323 kg |
Häufig gestellte Fragen (FAQs)
Q1: Is this probe compatible with older 3300 series components?
Yes, it is fully backward compatible with non-XL 3300 5 mm and 8 mm systems.
Q2: What is the primary use von this probe?
It is used for measuring shaft vibration and position in rotating machinery.
Q3: Can the probe be installed in hazardous areas?
Yes, it carries CSA, ATEX, and IECEx approvals for hazardous environments.
Q4: Does the probe require field calibration?
No, components are factory-matched and do not require field calibration.
Q5: What is the recommended gap setting?
Approximately 1.27 mm (50 mils), equivalent to –9 Vdc.
Q6: Can the probe withstand high temperatures?
Yes, the extended temperature range version handles up to +218°C.
Q7: Is the probe resistant to oil leaks?
Yes, the optional FluidLoc cable prevents fluid ingress along the cable.
Q8: Are special tools required for connector installation?
No, ClickLoc connectors only require finger-tight torque and click when secure.
Q9: Can the probe be mounted on small shaft diameters?
Yes, but scale factor accuracy is optimized for shafts ≥76.2 mm (3 in).
Q10: Is there any risk from electromagnetic interference?
No, it features strong RFI/EMI immStücky and complies with CE requirements.
Related or Same-Series Modells
| Modell Number | Beschreibung | Length | Gewicht |
|---|---|---|---|
| 330101-00-08-05-02-00 | 8 mm Probe, standard cable | 0.5 m | 0.290 kg |
| 330101-00-16-10-02-00 | 8 mm Probe, standard cable | 1.6 m | 0.365 kg |
| 330101-00-20-10-02-05 | 8 mm Probe, armored, ATEX certified | 2.0 m | 0.410 kg |
| 330101-00-30-10-02-00 | 8 mm Probe, standard cable | 3.0 m | 0.440 kg |
| 330101-00-50-10-02-05 | 8 mm Probe, armored, ATEX certified | 5.0 m | 0.600 kg |
| 330101-00-90-10-02-05 | 8 mm Probe, armored, ATEX certified | 9.0 m | 0.800 kg |
Popular Bently Nevada Modells
| Modell Number | Beschreibung | Application Type | Gewicht |
|---|---|---|---|
| 3500/42M-01-00 | Proximitor Seismic Monitor | Vibration Monitoring | 0.48 kg |
| 3500/22M-01-01 | Transient Data Interface Module | Data Collection | 0.75 kg |
| 330104-00-06-10-11-00 | 8 mm Proximity Probe with connector protector | Proximity Measurement | 0.325 kg |
| 330180-91-CN | Proximitor Sensor (1 m system length) | Signal Conversion | 0.246 kg |
| 3500/15E | Power Supply Module | System Power Supply | 0.65 kg |
| 3500/05 | System Rack | Module Integration | 3.2 kg |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.