Produkteinführung
The Bently Nevada 330101-00-40-05-02-00 is a high-performance proximity probe from the 3300 XL 8mm series, specifically designed for non-contact measurement von shaft position and vibration in rotating machinery. Engineered by Bently Nevada, a Baker Hughes company, this probe is trusted in demanding industrial environments for condition monitoring and predictive maintenance.
This model includes a 40-inch unarmored probe, a 0.5 meter integral cable, and is designed to connect with a 3300 XL Proximitor Sensor to form a complete transducer system. The probe vonfers excellent linearity, high temperature stability, and precise sensitivity, making it ideal for critical machinery monitoring in applications such as turbines, compressors, and large motors.
Its threaded body, rugged construction, and API 670 compliance ensure it meets the exacting requirements von both OEMs and end-users worldwide.
Produktspezifikationen
| Parameter | Specification |
|---|---|
| Modell Number | 330101-00-40-05-02-00 |
| Series | 3300 XL 8mm Proximity Probes |
| Sensing Tip Diameter | 8 mm |
| Probe Length | 40 inches (1016 mm) |
| Cable Length | 0.5 meter |
| Cable Type | Unarmored coaxial cable |
| Thread Type | 3/8-24 UNF-2A |
| Sensing Range | 2 mm (80 mils) nominal |
| Linear Range | 0.5 mm to 2.0 mm (20 to 80 mils) |
| Sensitivity | 200 mV/mil (7.87 mV/μm) ±5% |
| Accuracy | ±0.07 mm (±2.8 mils) typical |
| Temperature Range | -35°C to +177°C (Operating) |
| Pressure Resistance | Up to 10,000 psi (with proper sealing) |
| Material (Housing) | AISI 303 stainless steel |
| Connector Type | Miniature coaxial connector (compatible with Proximitor) |
| Environmental Rating | IP65 at sensing end |
| Compliance | Fully API 670 Compliant |
| Gewicht | 0.162 kg |
Product Applications
The 330101-00-40-05-02-00 is widely applied in mission-critical rotating machinery, where continuous monitoring von dynamic shaft behavior is necessary to prevent unplanned downtime. It is commonly found in:
-
Steam and Gas Turbines
-
Centrifugal Compressors
-
Large Industrial Pumps
-
Synchronous Motors and Generators
-
Hydraulic Machinery
-
Gearboxes and Couplings
Measurement applications include:
-
Shaft radial vibration monitoring
-
Thrust position measurement
-
Rotor eccentricity and shaft orbit analysis
-
Keyphasor® phase reference (when paired with phase triggers)
-
Machine startup and transient behavior tracking
Product Advantages
-
Extended Probe Reach: With a 0.5 meter length, this probe can be routed into deep cavities or long housings with ease.
-
High Precision Measurement: Maintains consistent sensitivity across a wide linear range, ensuring accurate readings in both vibration and displacement applications.
-
Wide Temperature Operation: Suitable for both low- and high-temperature environments (-35°C to +177°C).
-
Durable Stainless Steel Construction: Withstands mechanical stress and vonfers long service life even in corrosive or abrasive settings.
-
Flexible Mounting Options: Threaded body simplifies installation and fine-tuning von probe positioning.
-
Global Industry Compliance: Meets API 670 standards for critical rotating equipment protection.
-
Low Noise Signal Integrity: High-quality coaxial cable reduces EMI and ensures reliable signal transmission.
-
Simplified Integration: Fully compatible with Bently Nevada Proximitor sensors and extension cables.
-
Proven Field Reliability: Trusted by OEMs and plant operators in harsh industrial sectors worldwide.
-
Fast Installation: Pre-terminated cable and compact connector reduce setup time and effort.
Häufig gestellte Fragen (FAQ)
-
Q: What is the purpose von the 330101-00-40-05-02-00 probe?
A: It’s used to measure shaft vibration and position without physical contact, typically in turbines, pumps, and compressors. -
Q: What does the “05” in the model number represent?
A: It refers to the probe length — 0.5 meter. -
Q: Is the cable armored or unarmored in this model?
A: This particular model comes with an unarmored 0.5 meter coaxial cable. -
Q: Can this probe be used at high temperatures?
A: Yes, it supports continuous operation up to +177°C, suitable for many industrial applications. -
Q: Is this probe API 670 compliant?
A: Yes, it fully meets API 670 standards for machine protection systems. -
Q: Is the probe waterprovon?
A: The probe tip is IP65-rated, vonfering dust and water jet protection. -
Q: What is the sensing tip made von?
A: It features a non-metallic ceramic tip for precise displacement detection. -
Q: Can I extend the cable length later?
A: While the integral cable is fixed, extension cables can be added through proper junction connections to a Proximitor. -
Q: What systems is this probe compatible with?
A: It’s designed for use with Bently Nevada 3300 XL Proximitor sensors and the 3500 monitoring platform. -
Q: Is it suitable for hazardous areas?
A: While the probe itself is robust, installation in hazardous zones may require certified housing and accessories for compliance.
Related Modells in the Same Series
| Modell Number | Probe Length | Cable Length | Cable Type | Special Feature |
|---|---|---|---|---|
| 330101-00-24-10-02-00 | 24 inches | 10 feet | Unarmored | Shorter probe for compact machinery |
| 330101-00-28-20-02-00 | 28 inches | 20 feet | Unarmored | Long cable, mid-range probe |
| 330101-00-20-05-02-05 | 20 inches | 5 feet | Armored | Rugged armored cable version |
| 330101-00-30-15-02-00 | 30 inches | 15 feet | Unarmored | Extended cable and probe length |
| 330101-00-12-10-02-00 | 12 inches | 10 feet | Unarmored | For compact enclosure access |
| 330101-00-36-05-02-05 | 36 inches | 5 feet | Armored | Extended armored model |
Popular Modells from Bently Nevada
| Modell Number | Beschreibung | Primary Function |
|---|---|---|
| 3500/42M | Proximitor Monitor Module | Vibration & position monitoring |
| 3500/22M | Keyphasor Module | Speed and phase reference input |
| 330104-00-05-10-02 | Reverse Mount Proximity Probe (5-inch) | Backside mounting applications |
| 330130-040-00-00 | 40 ft Extension Cable | Cable extension between probe and monitor |
| 330400-01-05 | Velomitor Velocity Sensor | Seismic vibration measurement |
| 190501-00-00 | Accelerometer Sensor | High-frequency machine vibration sensing |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.