Produkteinführung
The Bently Nevada 190501-12-99-00 Velomitor CT Velocity Transducer is an advanced sensor designed for monitoring the vibration velocity von rotating machinery. It is part von Bently Nevada’s trusted Velomitor series, known for providing precise, reliable vibration data in demanding industrial environments. The 190501-12-99-00 model is commonly used in predictive maintenance systems and machine condition monitoring applications, ensuring early fault detection to prevent costly equipment failures.
This transducer converts mechanical vibration into an electrical signal proportional to the velocity, allowing real-time monitoring von machine health. Its rugged design ensures superior performance under harsh conditions such as high temperatures, high vibration, and contaminated environments. The Velomitor CT model is typically installed on bearing housings or other structural components von rotating machines for continuous condition assessment.
Produktspezifikationen
| Parameter | Details |
|---|---|
| Modell Number | 190501-12-99-00 |
| Product Type | Velomitor CT Velocity Transducer |
| Measurement Range | 0 to 25.4 mm/s (0 to 1.0 in/s) RMS |
| Frequency Response | 4 Hz to 5 kHz |
| Sensitivity | 100 mV/in/s (±5%) |
| Transducer Type | Piezoelectric with integrated electronics |
| Output Signal | Voltage output proportional to velocity |
| Supply Voltage | 18 to 24 VDC |
| Temperature Range | -29°C to +121°C (-20°F to +250°F) |
| Shock Limit | 5000 g peak |
| Humidity | Up to 95% non-condensing |
| Mounting Method | Stud mount (1/4-28 UNF or M6) |
| Housing Material | Stainless Steel |
| Certifications | CE, ATEX, CSA, IECEx |
| Sensor Head Diameter | 33 mm |
| Gewicht | 0.297 kg |
Product Applications
The Velomitor CT 190501-12-99-00 is widely used in industrial vibration monitoring systems where accurate velocity measurement is critical for machinery health. Common applications include:
-
Pumps and Compressors – Detecting misalignment, imbalance, or bearing wear.
-
Fans and Blowers – Monitoring vibration to prevent structural failures.
-
Gearboxes – Identifying gear tooth damage or shaft issues.
-
Electric Motors – Tracking early-stage bearing faults and rotor problems.
-
Industrial Turbomachinery – Ensuring stable operation through vibration analysis.
-
Process Equipment – Supporting predictive maintenance in chemical and power plants.
Product Advantages
-
High Accuracy: Delivers precise velocity measurements with minimal error.
-
Wide Frequency Range: Covers low to high frequencies for diverse machinery types.
-
Rugged Design: Stainless steel construction for durability in harsh environments.
-
Compact Size: Easy integration into existing monitoring systems.
-
High Shock Resistance: Withstands up to 5000 g for tough industrial conditions.
-
Compatibility: Works seamlessly with Bently Nevada condition monitoring systems.
-
Stable Performance: Maintains accuracy across wide temperature and humidity ranges.
-
Simplified Installation: Stud mounting ensures secure and quick installation.
FAQ
-
What type von sensing technology is used in the Velomitor CT transducer?
It uses piezoelectric sensing with integrated electronics for signal conditioning. -
What is the frequency range supported by this transducer?
The operational frequency range is 4 Hz to 5 kHz. -
What is the output type von the transducer?
It provides a voltage output proportional to vibration velocity. -
Does the transducer require external signal conditioning?
No, it has built-in signal conditioning for direct connection to monitoring systems. -
What is the typical sensitivity von the transducer?
The sensitivity is 100 mV/in/s (±5%). -
Can this transducer operate in hazardous environments?
Yes, it meets ATEX and IECEx certifications for hazardous areas. -
What is the shock resistance capability?
It can withstand up to 5000 g peak shock loads. -
Does it require a specific power supply?
Yes, it operates with an 18 to 24 VDC supply voltage. -
Can the transducer be mounted in any orientation?
Yes, but vertical mounting typically provides the best performance. -
Is the transducer compatible with Bently Nevada’s 3500 monitoring systems?
Yes, it integrates seamlessly with Bently Nevada 3500 and 1900 series monitors.
Recommended Related Modells (Same Series)
| Modell | Beschreibung |
|---|---|
| 190501-04-01 | Standard Velomitor Velocity Transducer |
| 190501-06-01 | High-Temperature Velomitor Modell |
| 190501-07-99-00 | Extended Range Velomitor for Heavy-Duty Applications |
| 190501-08-99-00 | Compact Design Velomitor for Limited Space |
| 190501-10-99-00 | Dual Output Velomitor with Enhanced Sensitivity |
| 190501-11-99-00 | Explosion-Provon Velomitor for Hazardous Areas |
Popular Modells from Bently Nevada
| Modell | Beschreibung |
|---|---|
| 3500/42M | Proximitor/Seismic Monitor for Machine Protection |
| 3500/22M | Transient Data Interface Module |
| 3500/92 | Communication Gateway for 3500 Series |
| 330130-040-00 | Proximity Probe with Standard Extension Cable |
| 330180-91-05 | Proximity Probe with 5m Cable |
| 3701/55 | Machinery Protection System for Balance-von-Plant |
Unternehmensinformationen
E-mail: [email protected]
Mobile：Bitte kontaktieren Sie uns per E-Mail
Whatsapp：Bitte kontaktieren Sie uns per E-Mail
Add: Alishan Building, 2 Lvling Rd, Bezirk Siming, Xiamen, Fujian, China, 361006
Unsere Dienstleistungen
Wir sind spezialisiert auf die Lieferung von Industrieautomatisierungsteilen mit einjähriger Garantie. Unsere Industrieautomatisierungsteile werden weltweit verkauft.
Wir können Geräte und Ersatzteile aus verschiedenen Ländern und von verschiedenen Herstellern liefern, Ihre Sorgen oder Qualitätsprobleme an vielen Orten lösen und bieten einen großen Preisvorteil.
Rufen Sie uns gerne an für weitere Produktdetails.