مقدمة المنتج
The GE IC698RMX016 is a Remote I/O Master Adapter designed for the Series 90-70 PLC family. It serves as a communication gateway between the CPU rack and distributed I/O racks, enabling high-speed, reliable data exchange over serial backplanes. This module allows you to extend your control system physically, placing I/O modules right where you need them while keeping wiring costs and complexity down.
Technical Parameters
| Parameter | Specification |
|---|---|
| الطراز Number | IC698RMX016 |
| Module Type | Remote I/O Master Adapter |
| Series | Series 90-70 PLC |
| Communication Interface | Serial Backplane (2 Mbps) |
| الدعمed Protocols | GE Fanuc Bus, Modbus RTU |
| Backplane Voltage | +5 V (supplied by rack backplane) |
| Current Consumption | 250 mA typical |
| Operating Temperature | 0 °C to +55 °C |
| Storage Temperature | –40 °C to +85 °C |
| Relative Humidity | 5 % to 95 % (non-condensing) |
| Dimensions | 132 × 102 × 25.4mm |
| الوزن | 0.59kg |
| Mounting | DIN-rail or rack slot |
| LED Indicators | Status, Tx/Rx activity |
Typical Applications
The IC698RMX016 is widely used in industrial automation settings where distributed control is required:
-
Manufacturing Lines
Move I/O points closer to sensors and actuators on assembly or packaging lines, reducing wiring runs. -
Water/Wastewater Treatment
Monitor pump stations and remote sensors over long distances. -
Oil & Gas Processing
Deploy remote skids for temperature and pressure monitoring in hazardous locations. -
Building Automation
Control HVAC dampers, lighting, and security sensors spread across large facilities. -
Steel & Metals
Interface with distributed drives and furnace controls in harsh‐environment sections من a plant.
Key Advantages
-
Reduced Wiring Complexity
Place I/O modules near field devices; only the serial link runs back to the CPU rack. -
High Reliability
Industrial-grade design withstands 0–55 °C and high humidity. -
Modular Scalability
Add or relocate remote racks without re-wiring the entire system. -
Deterministic Performance
Guaranteed cycle times over the bus link for tightly synchronized control. -
Easy Diagnostics
Front-panel LEDs report status and communication faults instantly. -
Seamless Integration
Works transparently with Series 90-70 CPU modules and existing GE I/O cards.
الأسئلة الشائعة (10)
Q1: What cabling is required between the CPU rack and the remote adapter?
A1: Use shielded, twisted-pair cable rated for 2 Mbps serial backplane communication. A Belden 9463 or equivalent is recommended.
Q2: How many remote racks can I connect to one IC698RMX016?
A2: Up to four remote racks in a daisy-chain configuration, limited by total bus length and timing requirements.
Q3: Can this module be hot-swapped during operation?
A3: رقم Always power down the backplane before inserting or removing the adapter to prevent damage.
Q4: Does it support galvanic isolation?
A4: The IC698RMX016 itself is not isolated; isolation must be provided by the rack backplane or external isolators.
Q5: How do I troubleshoot communication faults?
A5: Check front-panel LEDs: a steady green “Status” LED indicates normal operation; blinking amber or red denotes errors. Use sمنtware diagnostics in Prمنicy Machine Edition for detailed logs.
Q6: Is there a sمنtware configuration tool?
A6: Yes—use Prمنicy Machine Edition Logic Developer to assign node addresses, baud rate, and scan timing.
Q7: What is the maximum cable length supported?
A7: Up to 1,200 m at 78 kbps; for higher speeds (up to 2 Mbps), keep under 200 m to maintain signal integrity.
Q8: Can it work in redundant CPU environments?
A8: Yes, the remote adapter supports redundant configurations when used with dual-bus backplanes and redundant CPUs.
Q9: Are there any firmware updates available?
A9: Firmware is built into the CPU module; updates to the backplane protocol are handled by CPU firmware upgrades. No standalone upgrade for IC698RMX016.
Q10: What certifications does this module carry?
A10: UL Listing, CE marking, and c-ULus for industrial control equipment.
Recommended Same-Series or Related الطرازs
| الطراز Number | الوصف |
|---|---|
| IC698ACC016 | Backplane power distribution card |
| IC698RMX015 | Remote I/O Master Adapter (alternate revision) |
| IC698SIM001 | Serial interface module (single-port RS-232) |
| IC698DEM001 | Digital I/O expansion module |
| IC698CHS002 | High-speed counter module |
| IC698PMC300 | Programmable multicore controller module |
Popular PLC جي إي فانوك Modules (Same العلامة التجارية)
| الطراز Number | الوصف |
|---|---|
| IC693CPU340 | Series 90-30 CPU, 10 MB memory, high-speed bus |
| IC693MDL645 | Series 90-30 16-point DC input module |
| IC695CPE310 | PACSystems RX3i Ethernet CPU, 1 GB memory |
| IC200ALG600 | VersaMax analog I/O base with 4 analog slots |
| IC200UDR002 | VersaMax DC discrete input relay output module |
| IC695ACC401 | RX3i redundant CPU power supply card |
| IC200PWR005 | VersaMax power supply, 5 V/1.2 A |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.
