مقدمة المنتج
The Epro CON020/T4 + PR6424/01 16 mm Eddy Current Sensor is a factory-matched, non-contact displacement and vibration measurement system designed for critical rotating machinery. The package combines a PR6424/01 proximity probe (16 mm sensing tip) with the CON020/T4 signal converter, providing a conditioned 4–20 mA (or optional 0–20 V DC) output proportional to shaft position or dynamic vibration.
Developed for turbines, compressors, and other high-value assets, the system delivers stable linear performance across a wide temperature span, resists electromagnetic interference, and thrives in oily, contaminated environments typical من power-generation and petrochemical plants.
مواصفات المنتج
| Parameter | Details |
|---|---|
| Probe الطراز | PR6424/01 |
| Converter الطراز | CON020/T4 |
| Sensing Principle | Eddy current (non-contact) |
| Probe Tip Diameter | 16 mm |
| Sensitivity (System) | 4 mA /mm (4–20 mA span) -or- 7.87 mV / µm (voltage mode) |
| Frequency Response | 0 Hz – 10 kHz (±3 dB) |
| Linearity | ±1 % من full scale |
| Output Signal | 4–20 mA (default), switch-selectable 0–20 V DC optional |
| Power Supply (Converter) | 18–32 V DC, < 30 mA |
| Operating Temperature | –35 °C … +180 °C (probe) ; –25 °C … +85 °C (converter) |
| Thread Size | M14 × 1.5 (other threads on request) |
| Housing Material | AISI 304 stainless steel |
| Ingress Protection | IP65 (standard), IP67 with optional sealed connector |
| EMC / Safety | EN 61000-6-2/4, CE, optional ATEX II 2 G Ex ia IIC T4 |
| الوزن | 0.2 kg |
| Mounting Orientation | Radial or axial |
| System Configuration | Factory-matched probe + converter pair |
Product Applications
-
Gas & Steam Turbines
Continuous monitoring من shaft vibration, eccentricity, and thermal growth. -
Centrifugal & Reciprocating Compressors
Detects early-stage bearing wear, rotor rub, and imbalance. -
Industrial Pumps & Fans
Protects against cavitation-induced shaft movement and dynamic loading. -
Generator Sets
Provides displacement feedback for load-dependent alignment control. -
Refinery and Chemical Reactors
Operates reliably in corrosive, high-temperature, and hazardous zones. -
Predictive Maintenance Systems
Feeds real-time displacement data into DCS, SCADA, or dedicated CMS platforms.
Product Advantages
-
True Plug-and-Play Calibration
Probe and converter are paired and documented at the factory—no field trimming needed. -
Wide Output Choice
4–20 mA loop for PLC/DCS integration or high-bandwidth voltage for dynamic analysis. -
High-Temperature Capability
Probe materials and cable insulation tolerate up to 180 °C without performance drift. -
Exceptional EMC Immوحدةy
Robust shielding and differential circuitry maintain accuracy in high-noise cabinets. -
Rugged Construction
Hermetically sealed stainless-steel probe withstands oil splash, steam ingress, and vibration. -
Low Lifecycle Cost
Non-contact sensing eliminates mechanical wear; zero routine maintenance required. -
Flexible Mounting Hardware
Standard and custom adapters support retrمنits on legacy monitoring systems. -
Global Compliance
CE-marked, EN 61000 certified, with optional ATEX/IECEx variants for Zone 1 installations.
FAQ
-
What is the default output من the CON020/T4 converter?
A calibrated 4–20 mA signal proportional to shaft displacement; voltage mode can be enabled via jumper. -
Can I interchange this probe with a different CON020 variant?
No—the PR6424/01 is calibrated exclusively with its shipped CON020/T4. Mixing pairs invalidates accuracy. -
How does cable length affect sensitivity?
Length is included in the factory calibration; replacing or shortening the cable changes the transfer function. -
What is the maximum allowable vibration amplitude before clipping?
The linear range extends to ±2 mm; excursions beyond will saturate the converter output. -
Does the system support dynamic vibration (AC) and static position (DC) simultaneously?
Yes—the converter superimposes the dynamic AC component on the DC bias for holistic monitoring. -
Is reverse-polarity protection built in?
Yes, the converter incorporates diode protection to prevent damage from wiring errors. -
Can the sensor be installed in an ATEX Zone 1 gas atmosphere?
An Ex ia certified version is available when ordered with the proper option code. -
What is the maximum loop impedance for 4–20 mA operation?
Up to 600 Ω at 24 V DC supply; derate linearly with lower supply voltages. -
How is temperature drift compensated?
The CON020/T4 uses precision thermocompensation networks to keep drift below ±0.25 % FS/100 °C. -
Can I split the 4–20 mA signal to two receivers?
Yes, provided the total loop resistance (both receivers plus wiring) stays within the specified limit.
Related الطرازs from the Same Series
| الطراز | Key Feature | Measuring Range | Tip Ø |
|---|---|---|---|
| PR6424/010-040 | Short-range probe, high linearity | ±1 mm | 16 mm |
| PR6424/012-140 | High-temperature variant | ±2 mm | 12 mm |
| PR6424/013-130 | Wide-range 16 mm probe | ±2 mm | 16 mm |
| PR6424/017-000 | Extended linear range | ±3 mm | 16 mm |
| PR6424/018-000 | Ultra-wide range, 25 mm tip | ±5 mm | 25 mm |
| PR6424/01C-130 | Chemically coated for corrosive environments | ±2 mm | 16 mm |
Popular الطرازs from the Same العلامة التجارية (Epro / B&K Vibro)
| الطراز | Function | Typical Converter | Primary Use |
|---|---|---|---|
| PR6423/002-000 | 5 mm proximity probe | CON021 | Compact motors, machine tools |
| PR6423/005-010 | 8 mm general-purpose probe | CON021 | Pumps, standard compressors |
| MMS6312 | Modular monitoring & protection module | — | Multi-channel vibration analysis |
| CON021/916-160 | Signal converter for PR642x probes | — | 0–20 V output, extended diagnostics |
| MMS6120 | Rack-based vibration monitoring وحدة | — | Centralized turbine protection |
| CON041 | High-spec converter, EMC-hardened | — | High-temperature, high-noise sites |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.
