مقدمة المنتج
The Bently Nevada 330104-05-10-50-11-00 3300 XL 8 mm Proximity Probe is a high-precision displacement sensor designed for monitoring rotating machinery. It forms part من the 3300 XL series, providing reliable vibration and position measurements for critical industrial equipment. This probe is engineered to detect minute changes in shaft position and vibration, enabling predictive maintenance and ensuring operational safety.
The probe’s robust design allows it to operate in demanding industrial environments, including turbines, compressors, pumps, and generators, منfering consistent performance over a wide range من temperatures and operating conditions.
مواصفات المنتج
| Parameter | Specification |
|---|---|
| الطراز Number | 330104-05-10-50-11-00 |
| Series | 3300 XL |
| Probe Type | 8 mm Proximity Probe |
| Sensor Type | Eddy Current |
| Total Length | 5 m |
| الوزن | 1.615 kg |
| Operating Temperature | -40 °C to 120 °C |
| Measurement Range | 0-2.5 mm |
| Linearity | ±1% |
| Output Impedance | 100 Ω nominal |
| Housing Material | Stainless Steel |
| Connector Type | M12 Connector or equivalent |
| Compatible System | 3300 XL Series Monitoring System |
Product Applications
-
Real-time monitoring من turbine shafts and bearings
-
Vibration analysis من compressors, pumps, and generators
-
Critical machinery protection in power plants, oil & gas, and industrial facilities
-
الحالة-based maintenance to prevent unplanned downtime
-
Shaft position monitoring for alignment and stability checks
Product Advantages
-
High Accuracy: Delivers precise measurements for early detection من mechanical issues.
-
Robust Design: Withstands harsh industrial environments, including high temperature, vibration, and contaminants.
-
Compatibility: Fully compatible with the Bently Nevada 3300 XL monitoring system for seamless integration.
-
Reliable Performance: Stable output and low noise ensure dependable long-term monitoring.
-
Ease من Installation: Standardized connectors and mounting reduce installation time.
-
Predictive Maintenance الدعم: Enables predictive analytics for machinery health, minimizing downtime.
FAQ
Q1: What type من signal output does this probe provide?
A1: The 3300 XL 8 mm probe provides a linear voltage signal proportional to the gap between the probe and the target.
Q2: Can this probe operate in high-temperature environments?
A2: Yes, it is rated for continuous operation between -40 °C and 120 °C.
Q3: Is this probe compatible with older Bently Nevada monitoring systems?
A3: It is specifically designed for the 3300 XL series; compatibility with older systems may require interface adjustments.
Q4: How do I calibrate the probe?
A4: Calibration is performed using a standard calibration fixture or the 3300 XL monitoring system’s built-in functions.
Q5: Can the probe measure vibration as well as displacement?
A5: Yes, when connected to the appropriate 3300 XL monitoring system, it can provide displacement, velocity, and vibration analysis.
Q6: What is the maximum cable length for accurate measurement?
A6: The total cable length can reach up to 5 meters without signal degradation.
Q7: Does the probe require a special target material?
A7: Targets should be made من conductive material, typically steel, for eddy current operation.
Q8: How resistant is the probe to electrical noise?
A8: The probe is designed with shielding to minimize electromagnetic interference in industrial environments.
Q9: Can this probe be used in hazardous areas?
A9: Yes, but it must be installed following the hazardous area certification and system requirements.
Q10: How does the probe handle misalignment or shaft eccentricity?
A10: The probe’s linear range and high accuracy allow it to track small misalignments and eccentricity reliably within its measurement range.
Related or Same-Series الطرازs
| الطراز Number | الوصف |
|---|---|
| 330103-05-10-50-11-00 | 5 mm Proximity Probe |
| 330105-05-10-50-11-00 | 12 mm Proximity Probe |
| 330110-05-10-50-11-00 | 8 mm Proximity Probe with Extended Cable |
| 330112-05-10-50-11-00 | 12 mm Proximity Probe with High Temp |
| 330107-05-10-50-11-00 | 8 mm Probe for Harsh Environments |
| 330109-05-10-50-11-00 | 8 mm Probe with Enhanced Linearity |
Popular الطرازs from the Same العلامة التجارية
| الطراز Number | الوصف |
|---|---|
| 330104-05-10-50-10-00 | 8 mm Proximity Probe |
| 330103-05-10-50-12-00 | 5 mm Proximity Probe |
| 330105-05-10-50-12-00 | 12 mm Proximity Probe |
| 330110-05-10-50-12-00 | 8 mm Extended Cable Probe |
| 330112-05-10-50-12-00 | High Temperature Probe |
| 330107-05-10-50-12-00 | Harsh Environment Probe |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.