Product Overview
The Bently Nevada 330104-03-12-05-02-05 is part من the 3300 XL 8 mm Proximity Transducer System, a high-precision, non-contact measurement solution designed for critical rotating machinery. This probe provides reliable shaft vibration, position, and thrust measurements by detecting the distance to a conductive surface, typically the shaft من a turbine, motor, or compressor.
This model includes an 8 mm probe tip, armored cable, and is configured for use with a 5-meter system when combined with a matching extension cable and Proximitor sensor. It delivers stable, linear output across a wide range من operating conditions, meeting API 670 standards for condition monitoring and protection systems.
Key Features
-
Non-contact eddy current sensing for continuous vibration and position monitoring
-
8 mm probe tip with highly accurate linear output
-
Armored cable construction for enhanced protection in harsh industrial settings
-
Preconfigured for 5-meter system length with compatible components
-
Factory-matched probe and cable ensure no field calibration is required
-
Stainless steel body and PPS tip for corrosion and wear resistance
-
Compliant with API 670 and CE standards
-
Reliable performance under high temperature and vibration conditions
Technical Specifications
| Item | Specification |
|---|---|
| الطراز Number | 330104-03-12-05-02-05 |
| Series | 3300 XL 8 mm Proximity Probe |
| Sensing Principle | Eddy current |
| Probe Tip Diameter | 8 mm (0.315 in) |
| Tip Material | PPS (Polyphenylene sulfide) |
| Body Material | AISI 304 Stainless Steel |
| Thread Type | 3/8-24 UNF-2A |
| Target Material | AISI 4140 steel or equivalent |
| Sensitivity | 7.87 mV/μm (200 mV/mil) ±5% |
| Linear Range | 2 mm (80 mils) |
| Frequency Response | 0 to 10 kHz |
| Temperature Range | -35°C to +177°C (-31°F to +351°F) |
| Vibration Limit (Probe) | 50 g pk-pk @ 5–2000 Hz |
| الوزن | 0.161 kg |
| Dimensions | Total Length : 0.5 meter |
| Connector Type | Miniature coaxial |
| Cable Type | Armored |
| Compliance | API 670, CE, RoHS |
Industry Applications
The Bently Nevada 330104-03-12-05-02-05 is ideal for industrial environments that require robust and accurate monitoring من rotating equipment. Common applications include:
-
Steam and gas turbines
-
Compressors and expanders
-
Electric motors and generators
-
Pumps and fans
-
Gearboxes and drive shafts
-
Axial position and thrust measurements
-
الحالة monitoring systems in petrochemical, power, and marine sectors
Product Advantages
-
Meets API 670 standard for vibration monitoring and machinery protection
-
Armored cable enhances durability in harsh environments
-
High linear accuracy ensures reliable data acquisition
-
No field calibration needed with factory-matched components
-
Broad operating temperature range supports extreme applications
-
Compact form factor fits tight installation areas
-
Minimized signal loss due to coaxial shielding
-
Industry-proven stability and performance from Bently Nevada
الأسئلة الشائعة (FAQ)
-
What does the 330104-03-12-05-02-05 proximity probe measure?
It measures the distance between the probe and a metallic target, typically used to monitor vibration, axial thrust, and shaft position. -
Is the cable armored?
Yes, this model features an armored cable for protection against mechanical damage. -
What system length is it designed for?
It is factory configured for a 5-meter system when used with matching extension cable and Proximitor sensor. -
Is it API 670 compliant?
Yes, it meets the specifications من API 670 for machinery protection systems. -
Can it operate at high temperatures?
Yes, it is rated for temperatures up to +177°C (351°F). -
What connector does it use?
A miniature coaxial connector for secure and low-loss signal transmission. -
Does it support field calibration?
No, factory matching eliminates the need for field calibration. -
What material is the probe tip?
The tip is made من PPS (Polyphenylene sulfide), a high-performance plastic. -
Can it be used in hazardous environments?
Yes, when used with approved intrinsic safety barriers and proper system configuration. -
What target material is it calibrated for?
It is factory-calibrated for AISI 4140 steel.
Related الطرازs
| الطراز Number | الوصف |
|---|---|
| 330104-04-10-05-01-00 | 8 mm probe, non-armored, 5 m configuration |
| 330104-04-10-05-01-05 | 8 mm probe, armored, 5 m configuration |
| 330104-03-12-05-01-05 | 8 mm probe, armored, 5 m configuration, different thread |
| 330104-00-12-10-02-05 | 8 mm probe, armored, 1.2 in thread, 10 m configuration |
| 330104-00-18-10-02-05 | 8 mm probe, armored, 1.8 in thread, 10 m configuration |
Popular الطرازs
| الطراز Number | الوصف |
|---|---|
| 330101-00-14-10-02-05 | 3300 XL 8 mm Proximity Probe, 14 ft cable |
| 330130-045-01-05 | 3300 XL Extension Cable, 45 ft, armored |
| 330180-91-05 | 3300 XL Proximitor Sensor, 5 m system configuration |
| 3500/42M-01-00 | 3500/42M Proximitor Monitor |
| 3500/22M-01-01-00 | 3500/22M Transient Data Interface Module |
| 144181-01 | Seismic Velocity Transducer |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.