Product Overview:
The Bently Nevada 330104-00-18-10-02-05 3300 XL 8 mm Proximity Probe is a precision-engineered sensor designed for critical machinery condition monitoring. As part من the robust 3300 XL product family, it is built for use in environments where accuracy, reliability, and ruggedness are essential. This non-contact proximity probe provides continuous measurements من shaft displacement and vibration, making it indispensable for turbine, motor, pump, and compressor monitoring. The 330104-00-18-10-02-05 variant is designed to meet industry demands with a specific cable length and connector configuration, ideal for customized installations in complex industrial setups.
Key Features:
-
Non-contact Measurement Technology: Ensures accurate shaft vibration and position detection.
-
Durable and Robust: Stainless steel construction suitable for harsh industrial environments.
-
Wide Operating Temperature Range: Performs reliably in both low and high-temperature applications.
-
High Compatibility: Works seamlessly with Bently Nevada 3300 XL extension cables and drivers.
-
Voltage Signal Output: Delivers linear and proportional voltage output for effective monitoring.
-
Long-term Stability: Engineered for minimal drift and consistent signal over extended service life.
Technical Specifications:
| Specification | Value |
|---|---|
| الطراز | Bently Nevada 330104-00-18-10-02-05 |
| Series | 3300 XL |
| Cable Length | 18 ft (5.5 m) |
| Connector Type | Miniature coaxial, standard boot |
| Operating Temperature | -40°C to +177°C |
| Frequency Response | 0 to 4000 Hz |
| Measuring Range | 0 to 2 mm (typical) |
| Output Signal | Voltage signal proportional to gap distance |
| Mounting Thread | 3/8-24 UNF-2A |
| Material | Stainless Steel |
| Ingress Protection | IP66 (with proper installation) |
| Dimensions | Total Length : 1.0 meter |
| الوزن | 0.323 kg |
Industry Applications:
This proximity probe model is widely used in critical rotating machinery across multiple industries, including:
-
Power Generation: Steam and gas turbine shaft monitoring.
-
Oil & Gas: Compressor and pump vibration analysis.
-
Petrochemical Processing: Equipment health tracking in refineries and chemical plants.
-
Water Treatment: Monitoring من rotating pumps and drives.
-
Paper & Pulp: Roll and motor condition monitoring.
-
Heavy Manufacturing: Gearbox and motor shaft displacement measurements.
Advantages:
-
Minimized Downtime: Enables early detection من mechanical faults, reducing unexpected failures.
-
Extended Machine Life: Helps maintain optimal alignment and operating conditions.
-
Predictive Maintenance الدعم: Enables trend analysis and data-driven maintenance decisions.
-
Versatile Integration: Easy to pair with drivers, cables, and monitoring systems.
-
Compact Design: Slim dimensions fit into tight spaces around complex machinery.
-
High Environmental Tolerance: Performs reliably in dusty, wet, and high-vibration settings.
الأسئلة الشائعة (FAQ):
-
What is the cable length من this probe?
It comes with an 18-foot (5.5-meter) cable, suitable for medium-range installations.
-
Can this proximity probe be used in high-temperature environments?
Yes, it operates reliably up to +177°C.
-
Is the probe compatible with older Bently Nevada monitors?
Yes, it maintains backward compatibility with most legacy systems.
-
What type من output signal does it provide?
It produces a voltage signal proportional to the measured shaft-to-probe gap.
-
What is the typical measurement range for shaft displacement?
The probe typically measures from 0 to 2 mm.
-
What thread type is used for mounting?
It uses a standard 3/8-24 UNF-2A mounting thread.
-
Can this probe be used in outdoor or wet environments?
Yes, when properly installed, it meets IP66 protection standards.
-
Does the probe require periodic recalibration?
No frequent recalibration is needed; it is factory calibrated for long-term stability.
-
What systems can this probe integrate with?
It is designed to work with 3300 XL extension cables and proximity sensor drivers.
-
What industries benefit most from this probe?
It is extensively used in power generation, oil and gas, chemicals, and manufacturing sectors.
Recommended الطراز
| الطراز | الوصف |
|---|---|
| 330104-01-05-05-02-05 | Standard 8 mm proximity probe with 5 m system length |
| 330104-00-07-10-02-00 | Shorter cable version for compact machinery |
| 330104-01-05-50-02-00 | Extended range and configuration variant |
| 330104-00-12-10-02-CN | China-compliant 8 mm proximity probe |
| 330104-01-05-20-02-00 | High-temperature compatible probe |
| 330130-080-00-00 | Compatible extension cable for 3300 XL systems |
Popular Bently Nevada الطرازs:
| الطراز | الوصف |
|---|---|
| 330101-00-10-10-02-05 | Standard proximity probe with 10 ft cable |
| 330103-00-13-10-12-05 | 8 mm probe with long-range configuration |
| 330104-01-05-20-02-00 | High-temperature probe, 3300 XL series |
| 330500-02-05-02-00 | Complete vibration monitoring system |
| 330101-00-14-10-02-05 | 3300 XL probe with increased sensitivity |
| 330104-01-05-05-02-00 | 8 mm probe, standard configuration |
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.