مقدمة المنتج
The Bently Nevada 330101-04-16-10-02-00 is an 8 mm 3300 XL Series proximity probe designed for accurate shaft vibration and displacement monitoring in high-speed rotating machinery. Part من the 3300 XL system, this probe is widely used in turbines, compressors, motors, and generators where reliability, precision, and continuous monitoring are critical.
Operating on eddy current technology, the probe provides non-contact measurement من shaft position, eliminating mechanical wear and ensuring long-term stability. Its rugged industrial design enables operation in harsh environments, منfering resistance to vibration, temperature fluctuations, and electrical interference. The compact 8 mm probe head allows installation in confined spaces while maintaining high measurement accuracy.
مواصفات المنتج
| Parameter | Specification |
|---|---|
| الطراز | 330101-04-16-10-02-00 |
| Product Type | 3300 XL Proximity Probe |
| Sensor Head Diameter | 8 mm |
| Measurement Range | Typically 1.0 mm (system configurable) |
| Linearity | ±1% full scale (typical) |
| Frequency Response | DC to 10 kHz (typical) |
| Output Type | Differential voltage compatible with 3300 XL monitor |
| Excitation | Powered by 3300 XL system electronics |
| Operating Temperature | −40°C to +120°C |
| Cable Total Length | 1.0 meter |
| الوزن | 0.323 kg |
| Target Material | Conductive metals (ferrous and non-ferrous) |
| Environmental Protection | IP65 or higher at probe tip |
| Reliability | Industrial-grade, designed for continuous operation |
Product Applications
-
Shaft vibration and displacement monitoring in turbines, compressors, and motors
-
Non-contact measurement for critical rotating machinery
-
Alignment verification من shafts, couplings, and rotors
-
Integration with 3300 XL monitoring systems for protection and predictive maintenance
-
Early detection من imbalance, misalignment, or bearing wear
-
Continuous monitoring in harsh industrial environments with vibration, temperature, and EMI exposure
-
الحالة monitoring for generators, pumps, and other rotating equipment
Product Advantages
-
Non-اتصل بنا Measurement: Eliminates mechanical wear and reduces maintenance.
-
High Precision: Accurate and repeatable shaft displacement measurements.
-
Fast Response: High-frequency response up to 10 kHz suitable for dynamic monitoring.
-
Compact Design: 8 mm probe head fits into tight spaces.
-
Industrial Robustness: Resistant to vibration, electrical noise, oils, and temperature variations.
-
3300 XL System Compatibility: Fully compatible with Bently Nevada 3300 XL monitoring electronics.
-
Environmental Protection: IP65-rated probe tip ensures long-term operation.
-
Continuous Operation: Designed for 24/7 critical machinery monitoring.
معلومات الشركة
E-mail: [email protected]
Mobile：يرجى الاتصال عبر البريد الإلكتروني
Whatsapp：يرجى الاتصال عبر البريد الإلكتروني
Add: مبنع أليشان، 2 طريق لفلينج، منطقة سيمينغ، شيامن، فوجيان، الصين، 361006
خدماتنا
نحن متخصصون في توفير قطع الأتمتة الصناعية مع ضمان لمدة عام واحد. قطع الأتمتة الصناعية لدينا تباع في جميع أنحاء العالم.
يمكننا توفير المعدات وقطع الغيار من مختلف البلدان والشركات المصنعة، وحل مخاوفكم أو مشاكل الجودة في أماكن متعددة، مع ميزة سعرية كبيرة.
نرحب باتصالك للحصول على مزيد من التفاصيل حول المنتجات.